3000 Mini Mill
image map

3000 Deluxe Desktop Mill Specifications

Machine SC-3000-H (Stepper)   add to quote

SC-3000-V (Servo)      add to quote
X, Y, Z Travel 14" x 11" x 15"
380 x 275 x 375 mm
Z Axis Clearance 13.5”
345 mm
Throat

5"

125 mm
Spindle Nose Thread 3/4" - 16 T.P.I.
Spindle Nose Taper #1 Morse
Spindle Speed Range

70-2800 RPM

up to 10,000 RPM with High Speed Option
Spindle Power

1/3 HP

250 W
Headstock Rotation Left-Right 180 Degrees
Weight

60 lbs

27 kg
Stepper Control System SC-3000-H (Stepper)
Driver Type Full/Half Stepping (Micro-Stepping Optional)
Drive Technology Bi-Polar Chopper
Driver Current 2.0 amps/axis
Input voltage 110 VAC 220 VAC
Motor Torque (all axes) 269 oz-in
Maximum Feedrate 100 ipm
Overall Machine Dims
(L x W x H)		 44" x 44" x 43"
1118 x 1118 x 1092 (mm)
Servo Control System SC-3000-V (Servo)
Driver Type Closed-Loop Servo
Drive Technology Digital PID w/ Servo Gain Auto Tuning
Driver Current 8 Continuous, 12 Peak (amps/axis)
Input voltage 110 VAC 220 VAC
Motor Torque (all axes) 151 oz-in
Maximum Feedrate 150 ipm
Overall Machine Dims
(L x W x H)		 24.5" x 23.5" x 32"
620 x 600 x 815 mm
Signal Generator
PC Interface USB
Input Voltage 9VDC using 110 VAC or 220VAC Adapter (included)
Physical Size 8” x 6.25” x H=2.5"
203 x 159 x 63.5 mm
I/O Lines
(Standard)		 8 input, 8 output
I/O Lines
(with I/O Expansion Option)		 32 input, 32 output, 2 analog
Computer Requirements

Version 3

IBM compatible, Pentium 800MHz or Equivalent Processor
Windows NT/2000/XP/Vista
1-2 GB RAM depending on part complexity
1 Available USB or Serial Port (USB/Serial depends on signal generator)
Hard drive with at least 40MB of available space
High-performance graphics card*

*Recommended to improve performance when adjusting the viewports, but not required
specs