6500 Prototyping
& Production Mill

6500 Prototyping and Production Mill Specifications

Machine SC-6500-H (Stepper)   add to quote

SC-6500-V (Servo)      add to quote
X, Y, Z Travel 12.75" x 16.5" x 4.25"
325 x 420 x 110 mm
Z Axis Clearance 3.5”
90 mm
Spindle Power 800W
1 HP
Weight Step: 55lb
Servo: 56lb
Shipping Dims
(L x W x H)		 40" x 40" x 40"
1016 x 1016 x 1016 (mm)
Shipping Weight 200 ~ 225lb (depending on options)
Stepper Control System SC-6500-M (Micro-Stepper)  add to quote
Driver Type Micro-Stepping
Drive Technology Bi-Polar Chopper
Driver Current 3.5 amps/axis
Input voltage 110 VAC 220 VAC
Motor Torque (all axes) 135 oz-in
Maximum Feedrate 25 ipm
Overall Machine Dims
(L x W x H)		 24" x 26" x 27"
610 x 660 x 686 mm
Servo Control System SC-6500-V (Servo)
Driver Type Closed-Loop Servo
Drive Technology Digital PID w/ Servo Gain Auto Tuning
Driver Current 8 Continuous, 12 Peak (amps/axis)
Input voltage 110 VAC 220 VAC
Motor Torque (all axes) 151 oz-in
Maximum Feedrate 75 ipm
Overall Machine Dims
(L x W x H)		 27" x 29" x 30"
686 x 737 x 762 mm
Signal Generator
PC Interface USB
Input Voltage 9VDC using 110 VAC or 220VAC Adapter (included)
Physical Size 8” x 6.25” x H=2.5"
203 x 159 x 63.5 mm
I/O Lines
(Standard)		 8 input, 8 output
I/O Lines
(with I/O Expansion Option)		 32 input, 32 output, 2 analog
Computer Requirements

Version 3

IBM compatible, Pentium 800MHz or Equivalent Processor
Windows NT/2000/XP/Vista
1-2 GB RAM depending on part complexity
1 Available USB or Serial Port (USB/Serial depends on signal generator)
Hard drive with at least 40MB of available space
High-performance graphics card*

*Recommended to improve performance when adjusting the viewports, but not required
specs