7300 Prototyping
& Production Mill

7300 Prototyping and Production Mill Specifications

Machine SC-7300-V   add to quote
X, Y, Z Travel 15.5" x 11.5" x 5.5"
400 x 300 x 140 mm
Table Size 23.5” x 14.75”
600 x 375 mm
Z Axis Clearance 6.7”
170 mm
Spindle Varies
Machine Size 31” x 33” x 32”
780 x 850 x 810 mm
Machine Weight 264 lbs
120 kg
Servo Control System
Driver Type Closed-Loop Servo
Drive Technology Digital PID w/ Servo Gain Auto Tuning
Driver Current 8 Continuous, 12 Peak (amps/axis)
Input voltage 110 VAC 220 VAC
Axis Motor Power 100 Watt
Maximum Feedrate 200 ipm
Signal Generator
PC Interface USB
Input Voltage 9VDC using 110 VAC or 220VAC Adapter (included)
Physical Size 8” x 6.25” x H=2.5"
203 x 159 x 63.5 mm
I/O Lines
(Standard)		 8 input, 8 output
I/O Lines
(with I/O Expansion Option)		 32 input, 32 output, 2 analog
Computer Requirements

Version 3

IBM compatible, Pentium 800MHz or Equivalent Processor
Windows NT/2000/XP/Vista
1-2 GB RAM depending on part complexity
1 Available USB or Serial Port (USB/Serial depends on signal generator)
Hard drive with at least 40MB of available space
High-performance graphics card*

*Recommended to improve performance when adjusting the viewports, but not required

 

specs