8300 Prototyping
& Production Mill

8300 Prototyping and Production Mill Specifications

Machine SC-8300-V   add to quote
X, Y, Z Travel 21” x 39" x 6”
540 x 1000 x 150 mm
Table Size 23.5” x 14.75”
600 x 375 mm
Z Axis Clearance 8”
200 mm
Machine Size With Enclosure 46.25” x 55.5” x 46.25”
1175 x 1410 x 1175 mm
Machine Weight With Enclosure 450 lbs
205 kg
Servo Control System  
Driver Type Closed-Loop Servo
Drive Technology Digital PID w/ Servo Gain Auto Tuning
Driver Current 8 Continuous, 12 Peak (amps/axis)
Input voltage 110 VAC 220 VAC
Axis Motor Power 100 (ZX), 200 (Y) watts
Maximum Feedrate 200 ipm
Signal Generator
PC Interface USB
Input Voltage 9VDC using 110 VAC or 220VAC Adapter (included)
Physical Size 8” x 6.25” x H=2.5"
203 x 159 x 63.5 mm
I/O Lines
(Standard)		 8 input, 8 output
I/O Lines
(with I/O Expansion Option)		 32 input, 32 output, 2 analog
Computer Requirements

Version 3

IBM compatible, Pentium 800MHz or Equivalent Processor
Windows NT/2000/XP/Vista
1-2 GB RAM depending on part complexity
1 Available USB or Serial Port (USB/Serial depends on signal generator)
Hard drive with at least 40MB of available space
High-performance graphics card*

*Recommended to improve performance when adjusting the viewports, but not required

 

specs