9100
Benchtop Mill

9100 Benchtop Mill Specifications

Machine SC-9100-H (Stepper)   add to quote

SC-9100-V (Servo)      add to quote
X, Y, Z Travel 17" x 7" x 5"
425 x 175 x 125 mm
Z Axis Clearance 12.5”
320 mm
Spindle Power 1500W
2HP
Weight ------
Shipping Dims TBA
Shipping Weight 700lb
Stepper Control System SC-9100-H (Stepper)
Driver Type Full/Half Stepping (Micro-Stepping Optional)
Drive Technology Bi-Polar Chopper
Driver Current 3.5 amps/axis
Input voltage 110 VAC 220 VAC
Motor Torque (all axes) 424 oz-in
Maximum Feedrate 25 ipm
Overall Machine Dims
(L x W x H)		 44" x 44" x 43"
1118 x 1118 x 1092 (mm)
Servo Control System SC-9100-V (Servo)
Driver Type Closed-Loop Servo
Drive Technology Digital PID w/ Servo Gain Auto Tuning
Driver Current 8 Continuous, 12 Peak (amps/axis)
Input voltage 110 VAC 220 VAC
Motor Torque (all axes) 550 oz-in
Maximum Feedrate 75 ipm
Overall Machine Dims
(L x W x H)		 45" x 45" x 43"
1143 x 1143 x 1092 (mm)
Signal Generator
PC Interface USB
Input Voltage 9VDC using 110 VAC or 220VAC Adapter (included)
Physical Size 8” x 6.25” x H=2.5"
203 x 159 x 63.5 mm
I/O Lines
(Standard)		 8 input, 8 output
I/O Lines
(with I/O Expansion Option)		 32 input, 32 output, 2 analog
Computer Requirements

Version 3

IBM compatible, Pentium 800MHz or Equivalent Processor
Windows NT/2000/XP/Vista
1-2 GB RAM depending on part complexity
1 Available USB or Serial Port (USB/Serial depends on signal generator)
Hard drive with at least 40MB of available space
High-performance graphics card*

*Recommended to improve performance when adjusting the viewports, but not required
specs