retrofits
Bridgeport CNC Retrofit Kits
Stepper Servo  

 

 RL-2M
(Microstepper)		 RL-3M
(Microstepper)		 RL-4M
(Microstepper)
Photo RL_2M RL_3M RL_4M
Part # for Microstepper RL-2M
add to quote 		RL-3M
add to quote 		RL-4M
add to quote
Drive Box
Driver current per motor coil 10 Amps 10 Amps 10 Amps
Input Voltage 110 VAC or 220VAC 110 VAC or 220VAC 110 VAC or 220VAC
Physical Size of Driver Box W=6.25", L=14", H=6.25" W=6.25", L=14", H=6.25" W=6.25", L=14", H=6.25"
Drive Technology Microstepping Bi-Polar Chopper with adjustable current levels Microstepping Bi-Polar Chopper with adjustable current levels Microstepping Bi-Polar Chopper with adjustable current levels
Input Signal for Motor Control Step and Direction Step and Direction Step and Direction
Motor
Motor Torque 1600 oz-in 1600 oz-in 1600 oz-in
Flange Size NEMA 42 NEMA 42 NEMA 42
Shaft Diameter 0.625" 0.625" 0.625"
Cable Length 10 ft. 10 ft. 10 ft.
Signal Generator
PC Interface USB
Input Voltage 9VDC using 110 VAC or 220VAC Adapter (included)
Physical Size 8” x 6.25” x H=2.5"
203 x 159 x 63.5 mm
I/O Lines
(Standard)		 8 input, 8 output
I/O Lines
(with I/O Expansion Option)		 32 input, 32 output, 2 analog
Computer Requirements

Version 3

IBM compatible, Pentium 800MHz or Equivalent Processor
Windows NT/2000/XP/Vista
1-2 GB RAM depending on part complexity
1 Available USB or Serial Port (USB/Serial depends on signal generator)
Hard drive with at least 40MB of available space
High-performance graphics card*

*Recommended to improve performance when adjusting the viewports, but not required

 

 

Retrofit Product Selection Guide

selectionGuide
Click to enlarge