Benchtop CNC
Retrofit Kits

Benchtop CNC Retrofit Kits Specifications Servo

Stepper Servo  

Description

 2-axis Benchtop Retrofit Kit
(Servo)		 3-axis Benchtop Retrofit Kit
(Servo)		 4-axis Benchtop Retrofit Kit
(Servo)		 5-axis Benchtop Retrofit Kit
(Servo)
Photo RB-2-120-V RB-3-120-V RB-4-120-V RB-5-120-V
Part # for Servo RB-2-120-V
add to quote 		RB-3-120-V
add to quote 		RB-4-120-V
add to quote 		RB-5-120-V add to quote
Servo CNC Controller Included
Servo CNC Controller Model #

6501-2-120-V

2 Axis Pro-Series 8 Amp Continuous, 20 Amp Peak Servo CNC Controller with Integrated USB Signal Generator and Version 4.0 FlashCut CNC Software

6501-3-120-V

3 Axis Pro-Series 8 Amp Continuous, 20 Amp Peak Servo CNC Controller with Integrated USB Signal Generator and Version 4.0 FlashCut CNC Software

6501-4-120-V

4 Axis Pro-Series 8 Amp Continuous, 20 Amp Peak Servo CNC Controller with Integrated USB Signal Generator and Version 4.0 FlashCut CNC Software

6501-5-120-V

5 Axis Pro-Series 8 Amp Continuous, 20 Amp Peak Servo CNC Controller with Integrated USB Signal Generator and Version 4.0 FlashCut CNC Software
Servo Motors Included
Motor Model #

(2) MV-3401

550 oz-in NEMA 34 Servo Motor

(3) MV-3401

550 oz-in NEMA 34 Servo Motor

(4) MV-3401

550 oz-in NEMA 34 Servo Motor

(5) MV-3401

550 oz-in NEMA 34 Servo Motor
Servo Motor Cables Included
Cable Part #

(2) OC-M10-V

10 ft. Servo Motor Cable

(3) OC-M10-V

10 ft. Servo Motor Cable

 

(4) OC-M10-V

10 ft. Servo Motor Cable

 

(5) OC-M10-V

10 ft. Servo Motor Cable

 
Computer Requirements

Version 4

IBM compatible, Pentium 1GHz or equivalent processor
Windows XP/Vista/7 (32 or 64 bit)
1-2 GB RAM depending on size of G-Code file
1 available USB or Serial Port (USB/Serial depends on signal generator)
Hard drive with at least 60MB of available space
A high-performance graphics card is recommended for larger files with complex surfacing

 

 

Servo Retrofit Kits Selection Guide

selectionGuide
Click to enlarge