4400 Tabletop
Lathe

4400 Tabletop Lathe Specifications

 

Machine
(Available in Metric or English)		 SC-4400-M (Microstep)  add to quote

SC-4400-V (Servo)     add to quote
X, Z Travel 4.25" x 17"
110 x 430 mm
Swing Over Bed 3.5" (6.0" with optional riser block)
Swing Over Table 1.88" (4.25" with optional riser block)
Distance Between Centers 17"
Crosslide Travel 4.25"
Resolution 0.000125"
Hole Through Spindle 0.405"
Spindle Nose Thread 3/4" - 16 T.P.I.
Spindle Nose Taper #1 Morse
Spindle Speed Range 70-2800 rpm
Spindle Power 1/3 HP
250W
Tailstock Spindle Taper #0 Morse
Depth Overall, including Crosslide Travel 17"
Height Overall 8.5"
PC Interface USB
I/O Lines
(Standard)		 8 input, 8 output
I/O Lines
(with I/O Expansion Option)		 32 input, 32 output, 2 analog
Stepper Control System SC-4400-M (Microstep)
Driver Type Compact Microstepping Controller
Driver Technology Bi-Polar Chopper
Driver Current 2.5 amps/axis
Input voltage 110 VAC 220 VAC
Motor Torque (all Axes) 156 oz-in
Maximum Feedrate 25 in/min
Overall Machine Dims
(L x W x H)		 35" x 10" x 8"
889 x 254 x 203 (mm)
Servo Control System SC-4400-V (Servo)
Driver Type 8-12A Pro-Series Servo Controller
Driver Technology Digital PID w/ Servo Gain Auto Tuning
Driver Current 8 Continuous, 12 Peak (amps/axis)
Input voltage 110 VAC 220 VAC
Motor Torque 151 oz-in
Maximum Feedrate 50 in/min
Overall Machine Dims
(L x W x H)		 38" x 13" x 8"
965 x 330 x 203 (mm)
Computer Requirements

Version 4

IBM compatible, Pentium 1GHz or equivalent processor
Windows XP/Vista/7 (32 or 64 bit)
1-2 GB RAM depending on size of G-Code file
1 available USB or Serial Port (USB/Serial depends on signal generator)
Hard drive with at least 60MB of available space
A high-performance graphics card is recommended for larger files with complex surfacing

 

specs