2000 and 5400
Tabletop Mills
image map

2000 and 5400 Tabletop Mills Specifications

Machine
(Available in Metric or English)		 CNC Mill 2000
SC-2000-H(Stepper)
add to quote
SC-2000-V(Servo)
add to quote 		CNC Mill 5400
SC-5400-H(Stepper)
add to quote
SC-5400-V(Servo) add to quote
X, Y, Z Travel 8.38" x 7" x 5.38"
213 x 178 x 137 (mm)		 8.38" x 5" x 6.5"
213 x 127 x159 (mm)
Resolution 0.000125" 0.000125"
Throat Adjustable up to 12 3.5"
Spindle Nose Thread 3/4" - 16 T.P.I. 3/4" - 16 T.P.I.
Spindle Nose Taper #1 Morse #1 Morse
Spindle Speed Range 70-2800 rpm 70-2800 rpm
Spindle Power 1/3 hp
(high torque DC motor)		 1/3 hp
(high torque DC motor)
Headstock Rotation Left-Right 180º 180º
Column Rotation
Left-Right 		180º None
Column Pivot
Front-Back 		180º None
Column Pivot Left-Right 180º None
Column Travel In-Out 5.5" None
PC Interface USB USB
Stepper Control System SC-2000-H(Stepper) SC-5400-H(Stepper)
Driver Type Full/Half Stepping Full/Half Stepping
Driver Technology Bi-Polar Chopper Bi-Polar Chopper
Driver Current 2 amps/axis 2 amps/axis
Motor Torque (all axes) 135 oz-in 135 oz-in
Maximum Feedrate 25 (XY), 20 (Z) ipm 25 (XY), 20 (Z) ipm
Overall Machine Dims
(L x W x H)		 26" x 20" x 23"
660 x 508 x 584 (mm)		 19" x 20" x 24"
483 x 508 x 610 (mm)
Width, including
X Travel 		28" (711mm) 28" (711mm)
Servo Control System SC-2000-V(Servo) SC-5400-V(Servo)
Driver Type Closed-Loop Servo Closed-Loop Servo
Driver Technology Digital PID w/
Servo Gain Auto Tuning		 Digital PID w/
Servo Gain Auto Tuning
Driver Current 8 Continuous,
12 Peak (amps/axis)		 8 Continuous,
12 Peak (amps/axis)
Motor Torque (all axes) 151 oz-in 151 oz-in
Maximum Feedrate 45 (XYZ) in/min 45 (XYZ) in/min
Overall Machine Dims
(L x W x H)		 29" x 23" x 26"
737 x 584 x 660 (mm)		 29" x 21" x 27"
737 x 533 x 686 (mm)
Width, including
X Travel 		31" (787mm) 28" (711mm)
Signal Generator
PC Interface USB
Input Voltage 9VDC using 110 VAC or 220VAC Adapter (included)
Physical Size 8” x 6.25” x H=2.5"
203 x 159 x 63.5 mm
I/O Lines
(Standard)		 8 input, 8 output
I/O Lines
(with I/O Expansion Option)		 32 input, 32 output, 2 analog
Computer Requirements

Version 3

IBM compatible, Pentium 800MHz or Equivalent Processor
Windows NT/2000/XP/Vista
1-2 GB RAM depending on part complexity
1 Available USB or Serial Port (USB/Serial depends on signal generator)
Hard drive with at least 40MB of available space
High-performance graphics card*

*Recommended to improve performance when adjusting the viewports, but not required
specs