Pro-Series Servo

Product Description 12-20A Pro-Series Servo Controller 8-12A Pro-Series Servo Controller
Image


1 Axis 6501-1-200-V
+ Quote
6501-1-120-V
+ Quote
2 Axis 6501-2-200-V
+ Quote
6501-2-012-V
+ Quote
3 Axis 6501-3-200-V
+ Quote
6501-3-012-V
+ Quote
4 Axis 6501-4-200-V
+ Quote
6501-4-012-V
+ Quote
5 Axis 6501-5-200-V
+ Quote
6501-5-012-V
+ Quote
Replacement Drive Module OD-V-20A-182D-2010
+ Quote
OD-V-12A-182D-1210
+ Quote
Continuous Current [A] 12 8
Peak Current [A] 20 12
Bus Voltage [VDC] 80 80
Input Voltage [VAC] 115 or 230 115 or 230
Commonly Works With These Motors MV-2302, MV-3401, MV-4203 MP-2302, MV-3401
PC Interface USB USB
General Purpose Digital Output Lines
  • Standard: (8) Digital Outputs 0-5V
  • With Mini IO Expansion Board: (8) Digital Outputs 0-5V, 1 Analog Output 0-10V, 1 PWM Output 0-5V, (2) 0.5A dry contact relays
  • With Classic IO Expansion Board: (32) Digital Outputs 0-5V & NPN, (2) Analog Outputs 0-10V, (2) PNP or NPN Switches
  • Standard: (8) Digital Outputs 0-5V
  • With Mini IO Expansion Board: (8) Digital Outputs 0-5V, 1 Analog Output 0-10V, 1 PWM Output 0-5V, (2) 0.5A dry contact relays
  • With Classic IO Expansion Board: (32) Digital Outputs 0-5V & NPN, (2) Analog Outputs 0-10V, (2) PNP or NPN Switches
General Purpose Digital Input Lines
  • Standard: (8) Optically Isolated Inputs 0-5V, 0- 12V or 0-24V
  • With Mini IO Expansion Board: (8) Optically Isolated Inputs 0-5V, 0-12V or 0-24V, (1) Analog Input 0-10V, (1) Spindle Encoder Input - Differential or Single Ended
  • With Classic IO Expansion Board: (32) Optically Isolated Inputs 0-5V, 0-12V or 0-24V, (1) Analog Input 0-10V, (1) Spindle Encoder Input - Differential or Single Ended
  • Standard: (8) Optically Isolated Inputs 0-5V, 0- 12V or 0-24V
  • With Mini IO Expansion Board: (8) Optically Isolated Inputs 0-5V, 0-12V or 0-24V, (1) Analog Input 0-10V, (1) Spindle Encoder Input - Differential or Single Ended
  • With Classic IO Expansion Board: (32) Optically Isolated Inputs 0-5V, 0-12V or 0-24V, (1) Analog Input 0-10V, (1) Spindle Encoder Input - Differential or Single Ended
Weight [lbs] 16 16
Weight [kg] 7.3 7.3
Length [in] 12.7 12.7
Length [mm] 315 315
Width [in] 14.1 14.1
Width [mm] 357 357
Height [in] 5.7 5.7
Height [mm] 145 145
Corresponding reference
Diagram

At FlashCut CNC, we have years of experience helping customers choose the right CNC retrofit kit for their specific application. Whether you require a stepper, microstepper or servo solution, our sales staff can help you determine the right CNC retrofit kit to provide the most power for your machine. 

For more product details, visit our CNC RETROFIT section or call our support team directly at 888-883-5274.

Part Number MV-1701 MV-2302 MV-2321-C MV-3401 MV-3432-C MV-4201 MV-4203
+ Quote + Quote + Quote + Quote + Quote + Quote + Quote
Picture
NEMA Size 17 23 23 34 34 42 42
Encoder Count 1000 1000 1000 1000 1000 1000 1000
Max RPM 8000 6000 4000 6000 4000 3200 2000
Continuous Torque [oz-in] 13.44 64 116 184 400 640 850
Continuous Torque [N-m] 0.095 0.45 0.8 1.3 2.7 4.5 6
Peak Torque [oz-in] 41.6 191 295 552 700 3120 2549
Peak Torque [N-m] 0.294 1.35 2 3.9 4.8 22 18
Continuous Current [A] 5.3 5.2 8.1 11.4 8.8
Peak Current [A] 15.2 15.6 24.3 55.7 26.5
Torque Constant [oz-in/A] 2.688 12.7 22.66 56 96.4
Voltage Constant [V/kRPM] 2 9.2 11.65 16.7 29.22 42 53
Phase Resistance [Ohms] 0.45 0.7 0.62 0.4 0.55 0.82
Phase Inductance [mH] 0.8 2.23 0.92 1.02 1.26 5.1
Weight [lbs] 0.66 2.26 2 5.5 6.2 20 20.5
Mass [kg] 0.3 1.03 0.93 2.49 2.812 9.1 9.3
Length [in] 1.77 4.37 3.47 4.88 4.26 11.4 8.07
Length [mm] 44.958 113 88.2 124 108.19 290 205
Width [in] 1.66 2.23 2.27 3.38 3.42 4.33 4.33
Width [mm] 42.3 56.6 57.66 85.9 86.87 110 110
Height [in] 1.66 2.23 2.27 3.38 3.42 4.33 4.33
Height [mm] 42.3 56.6 57.66 85.9 86.87 110 110
Commonly Used With This Drive Box
  • 6501-X-120-V
  • 6501-X-120-V
  • 6501-X-120-V
  • 6501-X-200-V
  • 6501-X-120-V
  • 6501-X-200-V
  • 6501-X-120-V
  • 6501-X-200-V
  • 6501-X-200-V
  • 8501-X-180-V
  • 6501-X-200-V
  • 8501-X-180-V
Drawing pdf pdf pdf pdf
Description Photo
OI-01-U
+ Quote

The FlashCut CNC USB I/O Expansion Board provides the FlashCut CNC USB Signal Generator and Pro-Series Microstepping and Servo Controllers with an additional 24 inputs and 24 outputs (for a total of 32 inputs and 32 outputs), two 0-10V analog signals for spindle speed control or other devices that use precision analog control and an encoder input for spindle speed monitoring and threading applications. It easily fits into existing USB Signal Generator using the included hardware.

OI-03-U
+ Quote

Mini IO Expansion Board - Easily mounts on any existing Pro-Sereis or CompactSeries Controller to 1 channel of analog output, 1 PWM channel, 1 analog input and full quadrature encoder input. Used for THC, spindle control, encoder readng, threading or any other analog or PWM controlled process.

OP-01
+ Quote

This 38-function pendant allows you to control your machine from wherever you need to be. It is specially programmed to take advantage of commonly used functions in FlashCut such as Jogging, Point Moves, Setting Zero, Controlling Your Program, Homing and Turning on and off your Spindle. It can also be easily programmed from the FlashCut software interface for any special function that you need for your application. It connects to your PC using a 10' USB cable (included). It also includes a clear, flexible cover to keep the chips away from the keys without losing any functionality.

OR-04
+ Quote

Universal Relay Box (2 switched 110-240 VAC channels, up to15 amps total and 2 contact relays 0.5 amps each). Perfect for turning on and off a 1.5HP or less spindle, a Plasma Torch or any other AC powered or small relay controlled device.

OR-05
+ Quote

Relay Box - 1 Line 20 Amps. Perfect for switching the 110-220VAC power on and off to a 1.0 - 2.5 HP Spindle or any other 20 amp or less AC powered device.

OI-02
+ Quote

500 Line Encoder Kit - Includes 500 line optical encoder, housing, cable and bracket to attach to a spindle or housing. Necessary for doing threading or reading RPM in the software.

OT-01-5
+ Quote

Touch Probe with 5' cable gives your 3 Axis machine tool the capability to become a 3-D digitizer with the Flashcut CNC digitizing probe. Includes ruby-tip probe, 3/8" mounting shaft, cable and digitizing software to create point cloud (XYZ) or STL files. Capable of easily capturing 2-D or 3-D data, the touch-probe is an easy and effective way to reverse engineer your parts. Other size ruby tips optionally available.

OT-02-5
+ Quote

Tool Length Sensor with 5' Cable allows you to automatically sense the length of your tool after each manual or automatic tool change. It eliminates the need to manually "touch off" the tool to find program zero every time you change a tool.

OT-03-5
+ Quote

Touch Probe or Tool Length Sensor with 5' Cable - Includes multi-directional switch housing with mechanical parts for a touch probe and a tool length sensor

OA-SS-01
+ Quote

Spindle Speed Isolation Box for DC spindle speed controller - Works with the Sherline Spindle to enable software control of the spindle speed. Must be used in conjunction with Classic or Mini I/I Expansion Board.

OS-10-5S-SH-M
+ Quote

2000 and 5400 Limit / Home Switch Kit - Mill includes mounting brackets, hardware, 10' 5 Pair Limit Switch Cable and (5) switches

OS-10-5S-URK
+ Quote

Universal Benchtop Limit Switch Kit includes mounting brackets, hardware, 10' 5 Pair Limit Switch Cable and (5) switches

OS-04
+ Quote

Bridgeport Limit/Home Switch Kit includes mounting brackets, hardware, 10' 5 Pair Limit Switch Cable and (5) Industrial Switches

OS-5S
+ Quote

(5) miniature switches

OS-5S-IND
+ Quote

(5) industrial switches

OS8-10
+ Quote

8 Pair Limit Switch Cable, 10ft

OP-ESTOP-2
+ Quote

E-Stop and Illuminated Reset Button in a rugged steel case. Can be mounted or hand held.

OP-ESTOP-4
+ Quote

E-Stop, Illuminated Reset, cycle start and feed hold button in a rugged steel case. Can be mounted or hand-held.

OC-MV-10-18XX
+ Quote

10' Servo Motor Cable Pair with 18 AWG, shielded and grounded power cable with XLR connectors on both ends paired with shielded and grounded DB15 feedback cable

OC-MV-25-18XX
+ Quote

25' Servo Motor Cable Pair with 18 AWG, shielded and grounded power cable with XLR connectors on both ends paired with shielded and grounded DB15 feedback cable

OC-MV-50-18XX
+ Quote

50' Servo Motor Cable Pair with 18 AWG, shielded and grounded power cable with XLR connectors on both ends paired with shielded and grounded DB15 feedback cable

OC-MV-75-18XX
+ Quote

75' Servo Motor Cable Pair with 18 AWG, shielded and grounded power cable with XLR connectors on both ends paired with shielded and grounded DB15 feedback cable

OCS-02
+ Quote

Cooling/Sprayng Device the output from each nozzle is regulated by a single knob on the control. Mist spray may be turned on or off instantly to coordinate with the cutting cycle, and the spray mix made lean or rich as needed. Multi nozzle systems have a separate control for each coolant line. The controls are manifolded so that only one air hose is required. Each unit comes fully assembled ready for hook-up to your shop air supply.

OF-01-V
+ Quote

4" Rotary Table with Motor, 8-12A Servo Drive and Motor Cable - Perfect for adding fully interpolated or indexd 4th axis motion to the 2000 and 5400 CNC Mills or any other table top CNC machine driven by a Pro-Series Servo CNC Controller. 3-Jaw and 4-Jaw chucks avaialble for workpiece fixturing and right angle bracket available for vertical mounting.

OF-06-V
+ Quote

6" Rotary Table with Motor, 8-12A Servo Drive and Motor Cable. Perfect for adding fully interpolated or indexd 4th axis motion to the 9100 CNC Mill or any other Benchtop or Miniature CNC machine driven by a Pro-Series Servo CNC Controller. Can be mounted verticallly or horizontally.

OF-08-V
+ Quote

8" Rotary Table with Motor, 8-12A Servo Drive and Motor Cable. Perfect for adding fully interpolated or indexd 4th axis motion to a Retrofitted Bridgeport CNC Mill or any other Large CNC machine driven by a Pro-Series Servo CNC Controller. Can be mounted verticallly or horizontally.

OH-03-120-V
+ Quote

Additional axis connector kit for 12 amp Pro-Series Servo includes drive module and internal cabling to add an additional axis

OH-04-IO-Mini
+ Quote

I/O Connector Kit for Mini I/O Expansion Board includes 18 pin MFJ connector and contacts

OH-04-IO-Classic
+ Quote

I/O Connector Kit for Classic I/O Expansion Board includes 16 and 10 pin MFJ connector and contacts along with (3) 50 pin headers and contacts, encoder cable and an analog signal cable.

OH-05
+ Quote

Servo Motor Connector Kit (Power and Signal Connector for single axis) Includes 3 Pin XLR and DB15 Connectors

OH-03-200-V
+ Quote

Additional axis connector kit for 20 amp Pro-Series Servo includes drive module and internal cabling to add an additional axis

OD-V-20A-182D-2010
+ Quote

12 Amp Continuous, 20 Amp Peak Replacement Servo Drive Module for the Pro-Series Servo CNC Controller

NF-JA-33-1.45W07S-TC
+ Quote

High-frequency pneumatic tool changing spindle,33mm OD, 60,000 rpm. Max clamping range 1/8" . Includes frequency convertor w/ LED indication

NF-PM-148-991-4000-TR
+ Quote

500W 24,000 RPM Tool Changing Spindle with Tool Rack - Includes frequency converter w/ LED indication and 9 position tool rack for 1/4", 6mm, 1/8" or 3mm shank tools

NF-PM-148-991-4000
+ Quote

500W 24,000 RPM Tool Changing Spindle - Includes frequency converter w/ LED indication

NF-JA-Z33-M060.05 S14
+ Quote

High-frequency manual tool changing spindle,33mm OD, 60,000 rpm. Max clamping range 1/8" . Includes frequency convertor w/ LED indication

NF-JA-42-2.5W34FS-TC
+ Quote

High-frequency pneumatic tool changing spindle, 60,000 rpm.42 mm OD, Max clamping range 1/4" . Includes frequency convertor w/ LED indication

OC-SHER
+ Quote

Sherline Adapter Cable - DB25 Converter to control the Sherline 8760 Driver Box with the FlashCut CNC Singlal Generator and Windows Software. Includes adapter and 6' DB25 Cable.

OC-Tormach
+ Quote

Tormach PCNC 1100 series 2 Adapter - DB25 Converter to control the Tormach PCNC 1100 series 2 Driver Card with the FlashCut CNC Singlal Generator and Windows Software. Includes adapter and 6' DB25 Cable.

OC-MicroKinetics
+ Quote

MicroKinetics Adapter - DB25 Converter to control the MicroKinetics Driver Card with the FlashCut CNC Singlal Generator and Windows Software. Includes adapter and 6' DB25 Cable.

OC-Mach3
+ Quote

Mach3 Adapter - DB25 Converter to upgrade any drive box that was previously under Mach 3 control to FlashCut CNC Control. Includes adapter and 6' DB25 Cable.

OC-Gecko540
+ Quote

Gecko 540 Adapter - DB25 Converter to control the Gecko 540 Driver Card with the FlashCut CNC Singlal Generator and Windows Software. Includes adapter and 6' DB25 Cable.

OC-AHHA
+ Quote

AH-HA Adapter Cable - Converts DB25 motor signals to DB37 motor signals found on older AHHA brand CNC Controllers

OB-BX-01
+ Quote

DB25 Breakout Box - DB25 connector broken out to (25) screw terminals to conveniently connect motor signals from DB25 connector of SIgnal Generator to external drive components.

OA-03
+ Quote

6700 Series Clamping Accessory Kit Includes::(1) 6 x 5 x 1.75" Vice; (4) Clamping Blocks; (1) Hand Lever Clamping Devices - 1mm and 10mm thick;(2) 125mm,(2) 150mm,(2) 175mm Nut Strips

OA-02
+ Quote

We have assembled a kit of some of the most commonly used accessories for BenchTop Mills including basic fixturing hardware and tooling to get you cutting parts immediately. All the blocks, bolts, nuts, and hold-downs are case hardened. Each clamping kit includes: Metal rack, 24 studs, 6 step block pairs, 6 T-nuts, 6 flange nuts, 4 coupling nuts and 6 end hold-downs. Complete 12 piece Collet set includes: 1/8" to 3/4" collets in increments of 1/16" plus 7/8".

OA-01
+ Quote

Mini Mill Accessory Kit includes: 2 Hold Down Sets, 1 each of 1/8, 3/16, 1/4 Milling Collets, 2 3/8" End Mill Holder, 1 Milling Vise, 1 Mill Tooling Plate, 6 pc. End Mill Set, 3/8 Shank