Compact CNC Controller

Product Description Compact CNC Microstepping Controller
Photo

1 Axis 5501-1-025-M
+ Quote
2 Axis 5501-2-025-M
+ Quote
3 Axis 5501-3-025-M
+ Quote
4 Axis 5501-4-025-M
+ Quote
5 Axis 5501-5-025-M
+ Quote
Replacement Drive Module OD-M-025-01
+ Quote
Phase Current Range [A] 0.5 - 2.5
Bus Voltage [VDC] 30
Step Resolution Full,1/2, 1/4, 1/8
Idle Current Reduction 50%
Input Voltage [VAC] 110 or 220
Commonly Works With These Motors MP-1702, MP-2301-D, MP-2302, MP-2302-D, MP-2303
PC Interface USB
General Purpose Digital Output Lines
  • Standard: (8) Digital Outputs 0-5V
  • With Mini IO Expansion Board: (8) Digital Outputs 0-5V, 1 Analog Output 0-10V, 1 PWM Output 0-5V, (2) 0.5A dry contact relays
General Purpose Digital Input Lines
  • Standard: (8) Optically Isolated Inputs 0-5V, 0- 12V or 0-24V
  • With Mini IO Expansion Board: (8) Optically Isolated Inputs 0-5V, 0-12V or 0-24V, (1) Analog Input 0-10V, (1) Spindle Encoder Input - Differential or Single Ended
Weight [lbs] 1.95
Weight [kg] .90
Length [in] 60
Length [mm] 150
Width [in] 9.1
Width [mm] 231
Height [in] 2.7
Height [mm] 69
Corresponding reference Compact CNC Manual 2013-7-23.pdf
Diagram
Part Number MP-1702
+ Quote
MP-2301-D
+ Quote
MP-2302
+ Quote
MP-2302-D
+ Quote
MP-2303
+ Quote
MP-2303-D
+ Quote
Picture
NEMA Size 17 23 23 23 23 23
Step Angle [degrees] 1.8 1.8 1.8 1.8 1.8 1.8
Holding  Torque [oz-in] 62 155 269 269 454 454
Holding  Torque [N-m] 0.44 1.1 1.9 1.9 2.8 2.8
Current/Phase [A] 1.7 2 2 2 6 6
[Ohms] 1.7 1.5 1.7 1.7 0.5 0.5
Voltage/Phase [VDC] 2.9 3 3.4 3.4 3 3
Phase Inductance [mH] 2.5 5 9 9 2 2
Weight [lbs] 0.75 1.65 2.53 2.53 3.65 3.65
Mass [kg] 0.34 0.75 1.15 1.15 1.66 1.66
Length [in] 1.9 2.2 3.15 3.15 4.53 4.53
Length [mm] 48.3 56 80 80 115 115
Width [in] 1.66 2.24 2.24 2.24 2.24 2.24
Width [mm] 42.3 57 57 57 57 57
Height [in] 1.66 2.24 2.24 2.24 2.24 2.24
Height [mm] 42.3 57 57 57 57 57
Commonly Used With This Drive Box
  • 5501….
  • 5501…
  • and 6501…
  • 5501…
  • and 6501...
  • 5501
  • and 6501..
  • 5501
  • and 6501..
  • 5501
  • and 6501..
Drawing pdf pdf pdf pdf pdf
Description Photo
OI-01-U
+ Quote

The FlashCut CNC USB I/O Expansion Board provides the FlashCut CNC USB Signal Generator and Pro-Series Microstepping and Servo Controllers with an additional 24 inputs and 24 outputs (for a total of 32 inputs and 32 outputs), two 0-10V analog signals for spindle speed control or other devices that use precision analog control and an encoder input for spindle speed monitoring and threading applications. It easily fits into existing USB Signal Generator using the included hardware.

OI-03-U
+ Quote

Mini IO Expansion Board - Easily mounts on any existing Pro-Sereis or CompactSeries Controller to 1 channel of analog output, 1 PWM channel, 1 analog input and full quadrature encoder input. Used for THC, spindle control, encoder readng, threading or any other analog or PWM controlled process.

OP-01
+ Quote

This 38-function pendant allows you to control your machine from wherever you need to be. It is specially programmed to take advantage of commonly used functions in FlashCut such as Jogging, Point Moves, Setting Zero, Controlling Your Program, Homing and Turning on and off your Spindle. It can also be easily programmed from the FlashCut software interface for any special function that you need for your application. It connects to your PC using a 10' USB cable (included). It also includes a clear, flexible cover to keep the chips away from the keys without losing any functionality.

OI-02
+ Quote

500 Line Encoder Kit - Includes 500 line optical encoder, housing, cable and bracket to attach to a spindle or housing. Necessary for doing threading or reading RPM in the software.

OR-04
+ Quote

Universal Relay Box (2 switched 110-240 VAC channels, up to15 amps total and 2 contact relays 0.5 amps each). Perfect for turning on and off a 1.5HP or less spindle, a Plasma Torch or any other AC powered or small relay controlled device.

OA-SS-01
+ Quote

Spindle Speed Isolation Box for DC spindle speed controller - Works with the Sherline Spindle to enable software control of the spindle speed. Must be used in conjunction with Classic or Mini I/I Expansion Board.

OT-02-5
+ Quote

Tool Length Sensor with 5' Cable allows you to automatically sense the length of your tool after each manual or automatic tool change. It eliminates the need to manually "touch off" the tool to find program zero every time you change a tool.

OT-01-5
+ Quote

Touch Probe with 5' cable gives your 3 Axis machine tool the capability to become a 3-D digitizer with the Flashcut CNC digitizing probe. Includes ruby-tip probe, 3/8" mounting shaft, cable and digitizing software to create point cloud (XYZ) or STL files. Capable of easily capturing 2-D or 3-D data, the touch-probe is an easy and effective way to reverse engineer your parts. Other size ruby tips optionally available.

OT-03-5
+ Quote

Touch Probe or Tool Length Sensor with 5' Cable - Includes multi-directional switch housing with mechanical parts for a touch probe and a tool length sensor

OS-10-5S-SH-M
+ Quote

2000 and 5400 Limit / Home Switch Kit - Mill includes mounting brackets, hardware, 10' 5 Pair Limit Switch Cable and (5) switches

OS-10-4S-SH-L
+ Quote

Lathe Limit / Home Switch Kit includes mounting brackets, hardware, 10' 5 Pair Limit Switch Cable and (4) switches

OS-10-5S
+ Quote

10' 5 Pair Limit / Home Cable assembly + (5) switches

OS-5S
+ Quote

(5) miniature switches

OS-10
+ Quote

10' 5 Pair Limit Switch Cable

OS-25
+ Quote

25' 5 Pair Limit switch cable

OP-ESTOP-4
+ Quote

E-Stop, Illuminated Reset, cycle start and feed hold button in a rugged steel case. Can be mounted or hand-held.

OP-ESTOP-2
+ Quote

E-Stop and Illuminated Reset Button in a rugged steel case. Can be mounted or hand held.

OC-SHER
+ Quote

Sherline Adapter Cable - DB25 Converter to control the Sherline 8760 Driver Box with the FlashCut CNC Singlal Generator and Windows Software. Includes adapter and 6' DB25 Cable.

OC-MP-10-22XM
+ Quote

10' Stepper Motor Cable with 22 AWG shielded, grounded twisted pair for noise immunity with XLR connector on motor end and Mini Fit Jr.connector on controller end .

OC-MP-10-22MM
+ Quote

10' Stepper Motor Cable with 22 AWG shielded, grounded twisted pair for noise immunity with Mini-Fit Jr. connectors on both ends .

OC-MP-25-18XM
+ Quote

25' Stepper Motor Cable with 18 AWG shielded, grounded twisted pair for noise immunity with XLR connector on motor end and Mini Fit Jr.connector on controller end.

OC-MP-10-18XM
+ Quote

10' Stepper Motor Cable with 18 AWG shielded, grounded twisted pair for noise immunity with XLR connector on motor end and Mini Fit Jr.connector on controller end .

OCS-02
+ Quote

Cooling/Sprayng Device the output from each nozzle is regulated by a single knob on the control. Mist spray may be turned on or off instantly to coordinate with the cutting cycle, and the spray mix made lean or rich as needed. Multi nozzle systems have a separate control for each coolant line. The controls are manifolded so that only one air hose is required. Each unit comes fully assembled ready for hook-up to your shop air supply.

OC-MicroKinetics
+ Quote

MicroKinetics Adapter - DB25 Converter to control the MicroKinetics Driver Card with the FlashCut CNC Singlal Generator and Windows Software. Includes adapter and 6' DB25 Cable.

OC-Mach3
+ Quote

Mach3 Adapter - DB25 Converter to upgrade any drive box that was previously under Mach 3 control to FlashCut CNC Control. Includes adapter and 6' DB25 Cable.

OC-Gecko540
+ Quote

Gecko 540 Adapter - DB25 Converter to control the Gecko 540 Driver Card with the FlashCut CNC Singlal Generator and Windows Software. Includes adapter and 6' DB25 Cable.

OC-AHHA
+ Quote

AH-HA Adapter Cable - Converts DB25 motor signals to DB37 motor signals found on older AHHA brand CNC Controllers

OC-Tormach
+ Quote

Tormach PCNC 1100 series 2 Adapter - DB25 Converter to control the Tormach PCNC 1100 series 2 Driver Card with the FlashCut CNC Singlal Generator and Windows Software. Includes adapter and 6' DB25 Cable.

OB-BX-01
+ Quote

DB25 Breakout Box - DB25 connector broken out to (25) screw terminals to conveniently connect motor signals from DB25 connector of SIgnal Generator to external drive components.

OF-01-2.5-P
+ Quote

4" Rotary Table with Motor, 2.5A Microstepping Drive and Motor Cable. Perfect for adding fully interpolated or indexd 4th axis motion to the 2000 and 5400 CNC Mills or any other table top CNC machine driven by a Compact CNC Controller. 3-Jaw and 4-Jaw chucks avaialble for workpiece fixturing and right angle bracket available for vertical mounting.

NF-SH-3700-CNC
+ Quote

Sherline CNC Ready 4" Rotary Table - Includes rotary table and motor mount. Motor and drive not included.

NF-SH-3701
+ Quote

Right Angle Bracket for 4" Rotary Table

NF-SH-1040
+ Quote

3.125 OD 3-Jaw Chuck for lathe or rotary table.

OA-01
+ Quote

Mini Mill Accessory Kit includes: 2 Hold Down Sets, 1 each of 1/8, 3/16, 1/4 Milling Collets, 2 3/8" End Mill Holder, 1 Milling Vise, 1 Mill Tooling Plate, 6 pc. End Mill Set, 3/8 Shank

OH-04-IO-Classic
+ Quote

I/O Connector Kit for Classic I/O Expansion Board includes 16 and 10 pin MFJ connector and contacts along with (3) 50 pin headers and contacts, encoder cable and an analog signal cable.

OH-04-IO-Mini
+ Quote

I/O Connector Kit for Mini I/O Expansion Board includes 18 pin MFJ connector and contacts

OH-02
+ Quote

Motor Connector Kit for Minifit Jr. Includes (3) 6 Pin Mini Fit Jr. Connectors and contacts.

OD-M-025-01
+ Quote

2.5 amp Microstepping Replacement Drive Card for the Compact Microsteppng CNC Controller

Loading Video...
Loading Video...
Loading Video...