Pro-Series Microstepping

Product Description Pro-Series CNC Microstepping Controller
Photo

1 Axis 6501-1-080-M
+ Quote
2 Axis 6501-2-080-M
+ Quote
3 Axis 6501-3-080-M
+ Quote
4 Axis 6501-4-080-M
+ Quote
5 Axis 6501-5-080-M
+ Quote
Replacement Drive Module OD-080-M
+ Quote
Phase Current Range [A] 1.0 - 8.0* *Also available in 10A as a custom order
Bus Voltage [VDC] 70
Step Resolution Full*, 1/2*, 1/10, 1/25, 1/64, 1/100 *Includes a smooth step option
Idle Current Reduction 50%
Input Voltage [VAC] 110 or 220
Commonly Works With These Motors MP-1702, MP-2301-D, MP-2302, MP-2303, MP-3402, MP-3403, MP-4201
PC Interface USB
General Purpose Digital Output Lines
  • Standard: (8) Digital Outputs 0-5V
  • With Mini IO Expansion Board: (8) Digital Outputs 0-5V, 1 Analog Output 0-10V, 1 PWM Output 0-5V, (2) 0.5A dry contact relays
  • With Classic IO Expansion Board: (32) Digital Outputs 0-5V & NPN, (2) Analog Outputs 0-10V, (2) PNP or NPN Switches
General Purpose Digital Input Lines
  • Standard: (8) Optically Isolated Inputs 0-5V, 0- 12V or 0-24V
  • With Mini IO Expansion Board: (8) Optically Isolated Inputs 0-5V, 0-12V or 0-24V, (1) Analog Input 0-10V, (1) Spindle Encoder Input - Differential or Single Ended
  • With Classic IO Expansion Board: (32) Optically Isolated Inputs 0-5V, 0-12V or 0-24V, (1) Analog Input 0-10V, (1) Spindle Encoder Input - Differential or Single Ended
Weight [lbs] 14.40
Weight [kg] 6.54
Length [in] 12.7
Length [mm] 315
Width [in] 14.1
Width [mm] 357
Height [in] 5.7
Height [mm] 145
Corresponding reference
Diagram
Part Number MP-1702
+ Quote
MP-2301-D
+ Quote
MP-2302
+ Quote
MP-2302-D
+ Quote
MP-2303
+ Quote
MP-2303-D
+ Quote
MP-3402
+ Quote
MP-3403
+ Quote
MP-4201
+ Quote
Picture
NEMA Size 17 23 23 23 23 23 34 34 42
Step Angle [degrees] 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8
Holding  Torque [oz-in] 62 155 269 269 454 454 940 1160 2830
Holding  Torque [N-m] 0.44 1.1 1.9 1.9 2.8 2.8 4.2 8.2 20
Current/Phase [A] 1.7 2 2 2 6 6 6 6 8.5
[Ohms] 1.7 1.5 1.7 1.7 0.5 0.5 0.35 0.55 0.32
Voltage/Phase [VDC] 2.9 3 3.4 3.4 3 3 5.2 3.3 2.7
Phase Inductance [mH] 2.5 5 9 9 2 2 3.1 6.3 5.5
Weight [lbs] 0.75 1.65 2.53 2.53 3.65 3.65 5.5 8.8 18.7
Mass [kg] 0.34 0.75 1.15 1.15 1.66 1.66 2.5 4 8.5
Length [in] 1.9 2.2 3.15 3.15 4.53 4.53 3.07 4.65 5.75
Length [mm] 48.3 56 80 80 115 115 78 118 146
Width [in] 1.66 2.24 2.24 2.24 2.24 2.24 3.39 3.39 4.3
Width [mm] 42.3 57 57 57 57 57 86 86 110
Height [in] 1.66 2.24 2.24 2.24 2.24 2.24 3.39 3.39 4.3
Height [mm] 42.3 57 57 57 57 57 86 86 110
Commonly Used With This Drive Box
  • 5501….
  • 5501…
  • and 6501…
  • 5501…
  • and 6501...
  • 5501
  • and 6501..
  • 5501
  • and 6501..
  • 5501
  • and 6501..
  • 6501…
  • 6501….
  • 6501….
Drawing pdf pdf pdf pdf pdf pdf pdf pdf
Part Number Product Title Description Photo
OI-01-U
+ Quote
I/O Threading Expansion Board for USB Signal Generator

The FlashCut CNC USB I/O Expansion Board provides the FlashCut CNC USB Signal Generator and Pro-Series Microstepping and Servo Controllers with an additional 24 inputs and 24 outputs (for a total of 32 inputs and 32 outputs), two 0-10V analog signals for spindle speed control or other devices that use precision analog control and an encoder input for spindle speed monitoring and threading applications. It easily fits into existing USB Signal Generator using the included hardware.


OI-03-U
+ Quote
Mini IO Expansion Board

Mini IO Expansion Board - Easily mounts on any existing Pro-Sereis or CompactSeries Controller to 1 channel of analog output, 1 PWM channel, 1 analog input and full quadrature encoder input. Used for THC, spindle control, encoder readng, threading or any other analog or PWM controlled process.


OP-01
+ Quote
Control Pendant

This 38-function pendant allows you to control your machine from wherever you need to be. It is specially programmed to take advantage of commonly used functions in FlashCut such as Jogging, Point Moves, Setting Zero, Controlling Your Program, Homing and Turning on and off your Spindle. It can also be easily programmed from the FlashCut software interface for any special function that you need for your application. It connects to your PC using a 10' USB cable (included). It also includes a clear, flexible cover to keep the chips away from the keys without losing any functionality.


OR-04
+ Quote
Universal Relay Box

Universal Relay Box (2 switched 110-240 VAC channels, up to15 amps total and 2 contact relays 0.5 amps each). Perfect for turning on and off a 1.5HP or less spindle, a Plasma Torch or any other AC powered or small relay controlled device.


OR-05
+ Quote
Relay Box - 1 Lines 20 Amps

Relay Box - 1 Line 20 Amps. Perfect for switching the 110-220VAC power on and off to a 1.0 - 2.5 HP Spindle or any other 20 amp or less AC powered device.


OI-02
+ Quote
500 Line Encoder Kit

500 Line Encoder Kit - Includes 500 line optical encoder, housing, cable and bracket to attach to a spindle or housing. Necessary for doing threading or reading RPM in the software.


OS-10-5S-SH-M
+ Quote
2000 and 5400 Limit / Home Switch Kit - Mill

2000 and 5400 Limit / Home Switch Kit - Mill includes mounting brackets, hardware, 10' 5 Pair Limit Switch Cable and (5) switches


OS-10-4S-SH-L
+ Quote
Lathe Limit / Home Switch Kit

Lathe Limit / Home Switch Kit includes mounting brackets, hardware, 10' 5 Pair Limit Switch Cable and (4) switches


OS-10-5S-URK
+ Quote
Universal Benchtop Limit Switch Kit

Universal Benchtop Limit Switch Kit includes mounting brackets, hardware, 10' 5 Pair Limit Switch Cable and (5) switches


OS-10-5S
+ Quote
10' 5 Pair Limit / Home Cable assembly + (5) switches

10' 5 Pair Limit / Home Cable assembly + (5) switches


OP-ESTOP-2
+ Quote
E-Stop 2 Button Box

E-Stop and Illuminated Reset Button in a rugged steel case. Can be mounted or hand held.


OP-ESTOP-4
+ Quote
E-Stop 4 Button Box

E-Stop, Illuminated Reset, cycle start and feed hold button in a rugged steel case. Can be mounted or hand-held.


OA-SS-01
+ Quote
Spindle Speed Isolation Box for DC spindle speed controller

Spindle Speed Isolation Box for DC spindle speed controller - Works with the Sherline Spindle to enable software control of the spindle speed. Must be used in conjunction with Classic or Mini I/I Expansion Board.


OCS-02
+ Quote
Cooling/Sprayng Device with two spray nozzles

Cooling/Sprayng Device the output from each nozzle is regulated by a single knob on the control. Mist spray may be turned on or off instantly to coordinate with the cutting cycle, and the spray mix made lean or rich as needed. Multi nozzle systems have a separate control for each coolant line. The controls are manifolded so that only one air hose is required. Each unit comes fully assembled ready for hook-up to your shop air supply.

OC-MP-10-18XX
+ Quote
10' Stepper Motor Cable -18 AWG XLR-XLR

10' Stepper Motor Cable with 18 AWG shielded, grounded twisted pair for noise immunity with XLR connectors on both ends .


OC-MP-25-18XX
+ Quote
25' Stepper Motor Cable -18 AWG XLR-XLR

25' Stepper Motor Cable with 18 AWG shielded, grounded twisted pair for noise immunity with XLR connectors on both ends .


OC-MP-50-18XX
+ Quote
50' Stepper Motor Cable -18 AWG XLR-XLR

50' Stepper Motor Cable with 18 AWG shielded, grounded twisted pair for noise immunity with XLR connectors on both ends .


OT-01-5
+ Quote
Touch Probe with 5' cable

Touch Probe with 5' cable gives your 3 Axis machine tool the capability to become a 3-D digitizer with the Flashcut CNC digitizing probe. Includes ruby-tip probe, 3/8" mounting shaft, cable and digitizing software to create point cloud (XYZ) or STL files. Capable of easily capturing 2-D or 3-D data, the touch-probe is an easy and effective way to reverse engineer your parts. Other size ruby tips optionally available.


OT-02-5
+ Quote
Tool Length Sensor with 5' Cable

Tool Length Sensor with 5' Cable allows you to automatically sense the length of your tool after each manual or automatic tool change. It eliminates the need to manually "touch off" the tool to find program zero every time you change a tool.


OT-03-5
+ Quote
Touch Probe or Tool Length Sensor with 5' Cable

Touch Probe or Tool Length Sensor with 5' Cable - Includes multi-directional switch housing with mechanical parts for a touch probe and a tool length sensor


NF-SH-3700-CNC
+ Quote
Sherline CNC Ready 4" Rotary Table

Sherline CNC Ready 4" Rotary Table - Includes rotary table and motor mount. Motor and drive not included.


NF-SH-1040
+ Quote
3.125 OD 3-Jaw Chuck

3.125 OD 3-Jaw Chuck for lathe or rotary table.


NF-SH-3701
+ Quote
Right Angle Bracket for 4" Rotary Table

Right Angle Bracket for 4" Rotary Table


OF-01-8-P
+ Quote
4" Rotary Table with Motor, 8A Microstepping Stepper Drive and Motor Cable

4" Rotary Table with Motor, 8A Microstepping Stepper Drive and Motor Cable. Perfect for adding fully interpolated or indexd 4th axis motion to the 2000 and 5400 CNC Mills or any other table top CNC machine driven by a Pro-Series Microstepping CNC Controller. 3-Jaw and 4-Jaw chucks avaialble for workpiece fixturing and right angle bracket available for vertical mounting.


OF-08-P
+ Quote
8" Rotary Table with Motor, 8A Microstepping Stepper Drive and Motor Cable

8" Rotary Table with Motor, 8A Microstepping Stepper Drive and Motor Cable. Perfect for adding fully interpolated or indexd 4th axis motion to a Retrofitted Bridgeport CNC Mill or any other Large CNC machine driven by a Pro-Series Microstepping CNC Controller. Can be mounted verticallly or horizontally.


OF-06-P
+ Quote
6" Rotary Table with Motor, 8A Microstepping Stepper Drive and Motor Cable

6" Rotary Table with Motor, 8A Microstepping Stepper Drive and Motor Cable. Perfect for adding fully interpolated or indexd 4th axis motion to the 9100 CNC Mill or any other Benchtop or Miniature CNC machine driven by a Pro-Series Microstepping CNC Controller. Can be mounted verticallly or horizontally.


OA-01
+ Quote
Mini Mill Accessory Kit

Mini Mill Accessory Kit includes: 2 Hold Down Sets, 1 each of 1/8, 3/16, 1/4 Milling Collets, 2 3/8" End Mill Holder, 1 Milling Vise, 1 Mill Tooling Plate, 6 pc. End Mill Set, 3/8 Shank


OA-02
+ Quote
Benchtop Mill Accessory Kit

We have assembled a kit of some of the most commonly used accessories for BenchTop Mills including basic fixturing hardware and tooling to get you cutting parts immediately. All the blocks, bolts, nuts, and hold-downs are case hardened. Each clamping kit includes: Metal rack, 24 studs, 6 step block pairs, 6 T-nuts, 6 flange nuts, 4 coupling nuts and 6 end hold-downs. Complete 12 piece Collet set includes: 1/8" to 3/4" collets in increments of 1/16" plus 7/8".


OC-MicroKinetics
+ Quote
MicroKinetics Adapter

MicroKinetics Adapter - DB25 Converter to control the MicroKinetics Driver Card with the FlashCut CNC Singlal Generator and Windows Software. Includes adapter and 6' DB25 Cable.


OC-SHER
+ Quote
Sherline Adapter Cable

Sherline Adapter Cable - DB25 Converter to control the Sherline 8760 Driver Box with the FlashCut CNC Singlal Generator and Windows Software. Includes adapter and 6' DB25 Cable.


OD-080-M
+ Quote
8 amp Microstepping Replacement Drive Board

8 amp Microstepping Replacement Drive Board for the Pro-Series Microstepping CNC Controller


OC-Mach3
+ Quote
Mach3 Adapter

Mach3 Adapter - DB25 Converter to upgrade any drive box that was previously under Mach 3 control to FlashCut CNC Control. Includes adapter and 6' DB25 Cable.


OC-Tormach
+ Quote
Tormach PCNC 1100 series 2 Adapter

Tormach PCNC 1100 series 2 Adapter - DB25 Converter to control the Tormach PCNC 1100 series 2 Driver Card with the FlashCut CNC Singlal Generator and Windows Software. Includes adapter and 6' DB25 Cable.

OC-AHHA
+ Quote
AH-HA Adapter Cable

AH-HA Adapter Cable - Converts DB25 motor signals to DB37 motor signals found on older AHHA brand CNC Controllers


OH-06
+ Quote
XLR Stepper Motor Connector Kit

XLR Stepper Motor Connector Kit for 3 axes, includes ( 3) Male XLR Connectors


OS-04
+ Quote
Bridgeport Limit/Home Switch Kit includes mounting brackets and hardware

Bridgeport Limit/Home Switch Kit includes mounting brackets, hardware, 10' 5 Pair Limit Switch Cable and (5) Industrial Switches


OS-5S
+ Quote
(5) miniature switches

(5) miniature switches


OS-10
+ Quote
10' 5 Pair Limit Switch Cable

10' 5 Pair Limit Switch Cable


OS-25
+ Quote
25' 5 Pair Limit switch cable

25' 5 Pair Limit switch cable


OS8-10
+ Quote
8 Pair Limit Switch Cable, 10ft

8 Pair Limit Switch Cable, 10ft


OS-5S-IND
+ Quote
(5) industrial switches

(5) industrial switches

OH-03-080-M
+ Quote
Additional axis connector kit for 8 amp Pro-Series Microstepping - MFJ

Additional axis connector kit for 8 amp Pro-Series Microstepping includes drive and internal cabling to add an additional axis with a Mini Fit Jr. Connection

OH-03-080-M-XLR
+ Quote
Additional axis connector kit for 8 amp Pro-Series Microstepping - XLR

Additional axis connector kit for 8 amp Pro-Series Microstepping includes drive and internal cabling to add an additional axis with an XLR Connection


OH-04-IO-Classic
+ Quote
I/O Connector Kit for Classic I/O Expansion Board

I/O Connector Kit for Classic I/O Expansion Board includes 16 and 10 pin MFJ connector and contacts along with (3) 50 pin headers and contacts, encoder cable and an analog signal cable.

OC-Gecko540
+ Quote
Gecko 540 Adapter

Gecko 540 Adapter - DB25 Converter to control the Gecko 540 Driver Card with the FlashCut CNC Singlal Generator and Windows Software. Includes adapter and 6' DB25 Cable.


OH-04-IO-Mini
+ Quote
I/O Connector Kit for Mini I/O Expansion Board

I/O Connector Kit for Mini I/O Expansion Board includes 18 pin MFJ connector and contacts


OB-BX-01
+ Quote
DB25 Breakout Box

DB25 Breakout Box - DB25 connector broken out to (25) screw terminals to conveniently connect motor signals from DB25 connector of SIgnal Generator to external drive components.


Loading Video...
Loading Video...
Loading Video...