2000 Tabletop Mill

Machine FlashCut CNC 2000 Mill, Microstepping FlashCut CNC 2000 Mill, Pro Microstepping FlashCut CNC 2000 Mill, Pro Servo
Part Number SC-2000-025-M
+ Quote
SC-2000-080-M
+ Quote
SC-2000-120-V
+ Quote
X, Y, Z Travel 8.4" x 7" x 5.4"
213 x 178 x 137mm
8.4" x 7" x 5.4"
213 x 178 x 137mm
8.4" x 7" x 5.4"
213 x 178 x 137mm
Throat Adjustable up to 12" Adjustable up to 12" Adjustable up to 12"
Spindle Nose Thread 3/4" - 16 T.P.I. 3/4" - 16 T.P.I. 3/4" - 16 T.P.I.
Spindle Nose Taper #1 Morse #1 Morse #1 Morse
Spindle Speed Range 70-2800 rpm 70-2800 rpm 70-2800 rpm
Spindle Power 1/3 hp (high torque DC motor) 1/3 hp (high torque DC motor) 1/3 hp (high torque DC motor)
Headstock Rotation Left-Right 180º 180º 180º
Column Rotation Left-Right 180º 180º 180º
Column Pivot Front-Back 180º 180º 180º
Column Pivot Left-Right 180º 180º 180º
Column Travel In-Out 5.5" 5.5" 5.5"
I/O Lines (Standard) 8 8 8
I/O Lines (with I/O Expansion Option) 32 inputs/ 32 outputs 32 inputs/ 32 outputs 32 inputs/ 32 outputs
Driver Type 2.5A Compact Microstepping controller 8A Pro Series Microstepping 8-12A Pro-Series Servo
Drive Technology Bi-Polar Chopper Bi-Polar Chopper Digital PID w/ Servo Gain Auto Tuning
Driver Current 2.5 amp/axis 8 amps/axis 8 amp continuios, 12 Peak(amps/axis)
Input voltage 110 VAC /220 VAC 110 VAC /220 VAC 110 VAC /220 VAC
Motor Torque (all axis) 156 oz-in 269 oz-in 191 oz-in
Maximum Feedrate 25(XY), 20(Z) 35(XYZ) 45(XYZ)
Overall Machine Dims (L x W x H) 26"x20"x23"
660x508x584mm
29"x23"x26"
737x584x660mm
29"x23"x26"
737x584x660mm
Width, including X Travel 28" (711mm) 28" (711mm) 31" (787mm)
Part Number Product Title Description Photo
OD-M-025-01
+ Quote
2.5 amp Microstepping Replacement Drive Card

2.5 amp Microstepping Replacement Drive Card for the Compact Microsteppng CNC Controller


OP-ESTOP-2
+ Quote
E-Stop 2 Button Box

E-Stop and Illuminated Reset Button in a rugged steel case. Can be mounted or hand held.


OF-01-2.5-P
+ Quote
4" Rotary Table with Motor, 2.5A Microstepping Drive and Motor Cable

4" Rotary Table with Motor, 2.5A Microstepping Drive and Motor Cable. Perfect for adding fully interpolated or indexd 4th axis motion to the 2000 and 5400 CNC Mills or any other table top CNC machine driven by a Compact CNC Controller. 3-Jaw and 4-Jaw chucks avaialble for workpiece fixturing and right angle bracket available for vertical mounting.


OP-ESTOP-4
+ Quote
E-Stop 4 Button Box

E-Stop, Illuminated Reset, cycle start and feed hold button in a rugged steel case. Can be mounted or hand-held.


OF-01-8-P
+ Quote
4" Rotary Table with Motor, 8A Microstepping Stepper Drive and Motor Cable

4" Rotary Table with Motor, 8A Microstepping Stepper Drive and Motor Cable. Perfect for adding fully interpolated or indexd 4th axis motion to the 2000 and 5400 CNC Mills or any other table top CNC machine driven by a Pro-Series Microstepping CNC Controller. 3-Jaw and 4-Jaw chucks avaialble for workpiece fixturing and right angle bracket available for vertical mounting.


OR-04
+ Quote
Universal Relay Box

Universal Relay Box (2 switched 110-240 VAC channels, up to15 amps total and 2 contact relays 0.5 amps each). Perfect for turning on and off a 1.5HP or less spindle, a Plasma Torch or any other AC powered or small relay controlled device.


OF-01-V
+ Quote
4" Rotary Table with Motor, 8-12A Servo Drive and Motor Cable

4" Rotary Table with Motor, 8-12A Servo Drive and Motor Cable - Perfect for adding fully interpolated or indexd 4th axis motion to the 2000 and 5400 CNC Mills or any other table top CNC machine driven by a Pro-Series Servo CNC Controller. 3-Jaw and 4-Jaw chucks avaialble for workpiece fixturing and right angle bracket available for vertical mounting.


OS-10
+ Quote
10' 5 Pair Limit Switch Cable

10' 5 Pair Limit Switch Cable


OH-01
+ Quote
I/O Connector Kit for Classic I/O Expansion Board

I/O Connector Kit for Classic I/O Expansion Board includes 16 and 10 pin connectors and contacts


OS-10-5S
+ Quote
10' 5 Pair Limit / Home Cable assembly + (5) switches

10' 5 Pair Limit / Home Cable assembly + (5) switches


NF-SH-1040
+ Quote
3.125 OD 3-Jaw Chuck

3.125 OD 3-Jaw Chuck for lathe or rotary table.


OH-02
+ Quote
Motor Connector Kit for Mini Fit Jr.

Motor Connector Kit for Minifit Jr. Includes (3) 6 Pin Mini Fit Jr. Connectors and contacts.


OS-10-5S-SH-M
+ Quote
2000 and 5400 Limit / Home Switch Kit - Mill

2000 and 5400 Limit / Home Switch Kit - Mill includes mounting brackets, hardware, 10' 5 Pair Limit Switch Cable and (5) switches


NF-SH-3700-CNC
+ Quote
Sherline CNC Ready 4" Rotary Table

Sherline CNC Ready 4" Rotary Table - Includes rotary table and motor mount. Motor and drive not included.


OH-03-080-M
+ Quote
Additional axis connector kit for 8 amp Pro-Series Microstepping - MFJ

Additional axis connector kit for 8 amp Pro-Series Microstepping includes drive and internal cabling to add an additional axis with a Mini Fit Jr. Connection

OS-5S
+ Quote
(5) miniature switches

(5) miniature switches


NF-SH-3701
+ Quote
Right Angle Bracket for 4" Rotary Table

Right Angle Bracket for 4" Rotary Table


OH-03-080-M-XLR
+ Quote
Additional axis connector kit for 8 amp Pro-Series Microstepping - XLR

Additional axis connector kit for 8 amp Pro-Series Microstepping includes drive and internal cabling to add an additional axis with an XLR Connection


OT-01-5
+ Quote
Touch Probe with 5' cable

Touch Probe with 5' cable gives your 3 Axis machine tool the capability to become a 3-D digitizer with the Flashcut CNC digitizing probe. Includes ruby-tip probe, 3/8" mounting shaft, cable and digitizing software to create point cloud (XYZ) or STL files. Capable of easily capturing 2-D or 3-D data, the touch-probe is an easy and effective way to reverse engineer your parts. Other size ruby tips optionally available.


OA-01
+ Quote
Mini Mill Accessory Kit

Mini Mill Accessory Kit includes: 2 Hold Down Sets, 1 each of 1/8, 3/16, 1/4 Milling Collets, 2 3/8" End Mill Holder, 1 Milling Vise, 1 Mill Tooling Plate, 6 pc. End Mill Set, 3/8 Shank


OH-03-120-V
+ Quote
Additional axis connector kit for 12 amp Pro-Series Servo

Additional axis connector kit for 12 amp Pro-Series Servo includes drive module and internal cabling to add an additional axis


OT-02-5
+ Quote
Tool Length Sensor with 5' Cable

Tool Length Sensor with 5' Cable allows you to automatically sense the length of your tool after each manual or automatic tool change. It eliminates the need to manually "touch off" the tool to find program zero every time you change a tool.


OA-SS-01
+ Quote
Spindle Speed Isolation Box for DC spindle speed controller

Spindle Speed Isolation Box for DC spindle speed controller - Works with the Sherline Spindle to enable software control of the spindle speed. Must be used in conjunction with Classic or Mini I/I Expansion Board.


OB-BX-01
+ Quote
DB25 Breakout Box

DB25 Breakout Box - DB25 connector broken out to (25) screw terminals to conveniently connect motor signals from DB25 connector of SIgnal Generator to external drive components.


OH-04-IO-Classic
+ Quote
I/O Connector Kit for Classic I/O Expansion Board

I/O Connector Kit for Classic I/O Expansion Board includes 16 and 10 pin MFJ connector and contacts along with (3) 50 pin headers and contacts, encoder cable and an analog signal cable.

OT-03-5
+ Quote
Touch Probe or Tool Length Sensor with 5' Cable

Touch Probe or Tool Length Sensor with 5' Cable - Includes multi-directional switch housing with mechanical parts for a touch probe and a tool length sensor


OC-MP-10-18XM
+ Quote
10' Stepper Motor Cable -18 AWG XLR-MFJ

10' Stepper Motor Cable with 18 AWG shielded, grounded twisted pair for noise immunity with XLR connector on motor end and Mini Fit Jr.connector on controller end .


OH-04-IO-Mini
+ Quote
I/O Connector Kit for Mini I/O Expansion Board

I/O Connector Kit for Mini I/O Expansion Board includes 18 pin MFJ connector and contacts


OC-MP-10-18XX
+ Quote
10' Stepper Motor Cable -18 AWG XLR-XLR

10' Stepper Motor Cable with 18 AWG shielded, grounded twisted pair for noise immunity with XLR connectors on both ends .


OH-05
+ Quote
Servo Motor Connector Kit

Servo Motor Connector Kit (Power and Signal Connector for single axis) Includes 3 Pin XLR and DB15 Connectors


OC-MP-10-22MM
+ Quote
10' Stepper Motor Cable 22 AWG, MFJ-MFJ.

10' Stepper Motor Cable with 22 AWG shielded, grounded twisted pair for noise immunity with Mini-Fit Jr. connectors on both ends .


OH-06
+ Quote
XLR Stepper Motor Connector Kit

XLR Stepper Motor Connector Kit for 3 axes, includes ( 3) Male XLR Connectors


OC-MP-10-22XM
+ Quote
10' Stepper Motor Cable 22 AWG XLR-MFJ

10' Stepper Motor Cable with 22 AWG shielded, grounded twisted pair for noise immunity with XLR connector on motor end and Mini Fit Jr.connector on controller end .


OI-01-U
+ Quote
I/O Threading Expansion Board for USB Signal Generator

The FlashCut CNC USB I/O Expansion Board provides the FlashCut CNC USB Signal Generator and Pro-Series Microstepping and Servo Controllers with an additional 24 inputs and 24 outputs (for a total of 32 inputs and 32 outputs), two 0-10V analog signals for spindle speed control or other devices that use precision analog control and an encoder input for spindle speed monitoring and threading applications. It easily fits into existing USB Signal Generator using the included hardware.


OC-SHER
+ Quote
Sherline Adapter Cable

Sherline Adapter Cable - DB25 Converter to control the Sherline 8760 Driver Box with the FlashCut CNC Singlal Generator and Windows Software. Includes adapter and 6' DB25 Cable.


OI-03-U
+ Quote
Mini IO Expansion Board

Mini IO Expansion Board - Easily mounts on any existing Pro-Sereis or CompactSeries Controller to 1 channel of analog output, 1 PWM channel, 1 analog input and full quadrature encoder input. Used for THC, spindle control, encoder readng, threading or any other analog or PWM controlled process.


OD-080-M
+ Quote
8 amp Microstepping Replacement Drive Board

8 amp Microstepping Replacement Drive Board for the Pro-Series Microstepping CNC Controller


OP-01
+ Quote
Control Pendant

This 38-function pendant allows you to control your machine from wherever you need to be. It is specially programmed to take advantage of commonly used functions in FlashCut such as Jogging, Point Moves, Setting Zero, Controlling Your Program, Homing and Turning on and off your Spindle. It can also be easily programmed from the FlashCut software interface for any special function that you need for your application. It connects to your PC using a 10' USB cable (included). It also includes a clear, flexible cover to keep the chips away from the keys without losing any functionality.