9100 Benchtop CNC Mill

Machine FlashCut CNC 9100 Benchtop Mill, Pro Microstepping FlashCut CNC 9100 Benchtop Mill, Pro Servo
Part Number SC-9100-080-M
+ Quote
SC-9100-120-V
+ Quote
X, Y, Z Travel 17" x 6.5" x 4.5"
425 x 165 x 115mm
17" x 6.5" x 4.5"
425 x 165 x 115mm
Spindle Power 2HP 2HP
Shipping Dims 48"x48"x48"
1220x1220x1220
Shipping Weight 650lbs (300kg)
I/O Lines (Standard) 8 8
I/O Lines (with I/O Expansion Option) 32 inputs/ 32 outputs 32 inputs/ 32 outputs
Driver Type 8A Pro Series Microstepping 8-12A Pro-Series Servo
Drive Technology Bi-Polar Chopper Digital PID w/ Servo Gain Auto Tuning
Driver Current 8 amps/axis 8 amp continuios, 12 Peak(amps/axis)
Input voltage 110 VAC /220 VAC 110 VAC /220 VAC
Maximum Feedrate 50 80
Motor Torque (all axis) 940 oz-in 550 oz-in
Overall Machine Dims (L x W x H) 44"x44"x43"
1118x1118x1092mm
45"x45"x43"
1143x1143x1092mm
Part Number Product Title Description Photo
OS8-10
+ Quote
8 Pair Limit Switch Cable, 10ft

8 Pair Limit Switch Cable, 10ft


OH-04-IO-Classic
+ Quote
I/O Connector Kit for Classic I/O Expansion Board

I/O Connector Kit for Classic I/O Expansion Board includes 16 and 10 pin MFJ connector and contacts along with (3) 50 pin headers and contacts, encoder cable and an analog signal cable.

OC-MV-50-18XX
+ Quote
50' Servo Motor Cable 18 AWG XLR power cable and DB15 feedback cable pair

50' Servo Motor Cable Pair with 18 AWG, shielded and grounded power cable with XLR connectors on both ends paired with shielded and grounded DB15 feedback cable


OS-5S-IND
+ Quote
(5) industrial switches

(5) industrial switches

OH-03-200-V
+ Quote
Additional axis connector kit for 20 amp Pro-Series Servo

Additional axis connector kit for 20 amp Pro-Series Servo includes drive module and internal cabling to add an additional axis


OC-MV-25-18XX
+ Quote
25' Servo Motor Cable 18 AWG XLR power cable and DB15 feedback cable pair

25' Servo Motor Cable Pair with 18 AWG, shielded and grounded power cable with XLR connectors on both ends paired with shielded and grounded DB15 feedback cable


OS-5S
+ Quote
(5) miniature switches

(5) miniature switches


OH-03-120-V
+ Quote
Additional axis connector kit for 12 amp Pro-Series Servo

Additional axis connector kit for 12 amp Pro-Series Servo includes drive module and internal cabling to add an additional axis


OC-MP-50-18XX
+ Quote
50' Stepper Motor Cable -18 AWG XLR-XLR

50' Stepper Motor Cable with 18 AWG shielded, grounded twisted pair for noise immunity with XLR connectors on both ends .


OS-25
+ Quote
25' 5 Pair Limit switch cable

25' 5 Pair Limit switch cable


OI-01-U
+ Quote
I/O Threading Expansion Board for USB Signal Generator

The FlashCut CNC USB I/O Expansion Board provides the FlashCut CNC USB Signal Generator and Pro-Series Microstepping and Servo Controllers with an additional 24 inputs and 24 outputs (for a total of 32 inputs and 32 outputs), two 0-10V analog signals for spindle speed control or other devices that use precision analog control and an encoder input for spindle speed monitoring and threading applications. It easily fits into existing USB Signal Generator using the included hardware.


OC-MP-25-18XX
+ Quote
25' Stepper Motor Cable -18 AWG XLR-XLR

25' Stepper Motor Cable with 18 AWG shielded, grounded twisted pair for noise immunity with XLR connectors on both ends .


OS-10-5S-URK
+ Quote
Universal Benchtop Limit Switch Kit

Universal Benchtop Limit Switch Kit includes mounting brackets, hardware, 10' 5 Pair Limit Switch Cable and (5) switches


OF-08-V
+ Quote
8" Rotary Table with Motor, 8-12A Servo Drive and Motor Cable

8" Rotary Table with Motor, 8-12A Servo Drive and Motor Cable. Perfect for adding fully interpolated or indexd 4th axis motion to a Retrofitted Bridgeport CNC Mill or any other Large CNC machine driven by a Pro-Series Servo CNC Controller. Can be mounted verticallly or horizontally.


OH-03-080-M-XLR
+ Quote
Additional axis connector kit for 8 amp Pro-Series Microstepping - XLR

Additional axis connector kit for 8 amp Pro-Series Microstepping includes drive and internal cabling to add an additional axis with an XLR Connection


OS-10-5S
+ Quote
10' 5 Pair Limit / Home Cable assembly + (5) switches

10' 5 Pair Limit / Home Cable assembly + (5) switches


OF-08-P
+ Quote
8" Rotary Table with Motor, 8A Microstepping Stepper Drive and Motor Cable

8" Rotary Table with Motor, 8A Microstepping Stepper Drive and Motor Cable. Perfect for adding fully interpolated or indexd 4th axis motion to a Retrofitted Bridgeport CNC Mill or any other Large CNC machine driven by a Pro-Series Microstepping CNC Controller. Can be mounted verticallly or horizontally.


OH-03-080-M
+ Quote
Additional axis connector kit for 8 amp Pro-Series Microstepping - MFJ

Additional axis connector kit for 8 amp Pro-Series Microstepping includes drive and internal cabling to add an additional axis with a Mini Fit Jr. Connection

OS-10
+ Quote
10' 5 Pair Limit Switch Cable

10' 5 Pair Limit Switch Cable


OF-06-V
+ Quote
6" Rotary Table with Motor, 8-12A Servo Drive and Motor Cable

6" Rotary Table with Motor, 8-12A Servo Drive and Motor Cable. Perfect for adding fully interpolated or indexd 4th axis motion to the 9100 CNC Mill or any other Benchtop or Miniature CNC machine driven by a Pro-Series Servo CNC Controller. Can be mounted verticallly or horizontally.


OC-MP-10-18XX
+ Quote
10' Stepper Motor Cable -18 AWG XLR-XLR

10' Stepper Motor Cable with 18 AWG shielded, grounded twisted pair for noise immunity with XLR connectors on both ends .


OR-05
+ Quote
Relay Box - 1 Lines 20 Amps

Relay Box - 1 Line 20 Amps. Perfect for switching the 110-220VAC power on and off to a 1.0 - 2.5 HP Spindle or any other 20 amp or less AC powered device.


OF-06-P
+ Quote
6" Rotary Table with Motor, 8A Microstepping Stepper Drive and Motor Cable

6" Rotary Table with Motor, 8A Microstepping Stepper Drive and Motor Cable. Perfect for adding fully interpolated or indexd 4th axis motion to the 9100 CNC Mill or any other Benchtop or Miniature CNC machine driven by a Pro-Series Microstepping CNC Controller. Can be mounted verticallly or horizontally.


OA-02
+ Quote
Benchtop Mill Accessory Kit

We have assembled a kit of some of the most commonly used accessories for BenchTop Mills including basic fixturing hardware and tooling to get you cutting parts immediately. All the blocks, bolts, nuts, and hold-downs are case hardened. Each clamping kit includes: Metal rack, 24 studs, 6 step block pairs, 6 T-nuts, 6 flange nuts, 4 coupling nuts and 6 end hold-downs. Complete 12 piece Collet set includes: 1/8" to 3/4" collets in increments of 1/16" plus 7/8".


OR-04
+ Quote
Universal Relay Box

Universal Relay Box (2 switched 110-240 VAC channels, up to15 amps total and 2 contact relays 0.5 amps each). Perfect for turning on and off a 1.5HP or less spindle, a Plasma Torch or any other AC powered or small relay controlled device.


OF-01-V
+ Quote
4" Rotary Table with Motor, 8-12A Servo Drive and Motor Cable

4" Rotary Table with Motor, 8-12A Servo Drive and Motor Cable - Perfect for adding fully interpolated or indexd 4th axis motion to the 2000 and 5400 CNC Mills or any other table top CNC machine driven by a Pro-Series Servo CNC Controller. 3-Jaw and 4-Jaw chucks avaialble for workpiece fixturing and right angle bracket available for vertical mounting.


OP-ESTOP-4
+ Quote
E-Stop 4 Button Box

E-Stop, Illuminated Reset, cycle start and feed hold button in a rugged steel case. Can be mounted or hand-held.


OF-01-8-P
+ Quote
4" Rotary Table with Motor, 8A Microstepping Stepper Drive and Motor Cable

4" Rotary Table with Motor, 8A Microstepping Stepper Drive and Motor Cable. Perfect for adding fully interpolated or indexd 4th axis motion to the 2000 and 5400 CNC Mills or any other table top CNC machine driven by a Pro-Series Microstepping CNC Controller. 3-Jaw and 4-Jaw chucks avaialble for workpiece fixturing and right angle bracket available for vertical mounting.


OP-ESTOP-2
+ Quote
E-Stop 2 Button Box

E-Stop and Illuminated Reset Button in a rugged steel case. Can be mounted or hand held.


OD-V-20A-182D-2010
+ Quote
12 Amp Continuous, 20 Amp Peak Replacement Servo Drive Module

12 Amp Continuous, 20 Amp Peak Replacement Servo Drive Module for the Pro-Series Servo CNC Controller


OP-01
+ Quote
Control Pendant

This 38-function pendant allows you to control your machine from wherever you need to be. It is specially programmed to take advantage of commonly used functions in FlashCut such as Jogging, Point Moves, Setting Zero, Controlling Your Program, Homing and Turning on and off your Spindle. It can also be easily programmed from the FlashCut software interface for any special function that you need for your application. It connects to your PC using a 10' USB cable (included). It also includes a clear, flexible cover to keep the chips away from the keys without losing any functionality.


OD-V-12A-182D-1210
+ Quote
8 Amp Continuous, 12 Amp Peak Replacement Servo Drive Module

8 Amp Continuous, 12 Amp Peak Replacement Servo Drive Module for the Pro-Series Servo CNC Controller


OT-03-5
+ Quote
Touch Probe or Tool Length Sensor with 5' Cable

Touch Probe or Tool Length Sensor with 5' Cable - Includes multi-directional switch housing with mechanical parts for a touch probe and a tool length sensor


OI-03-U
+ Quote
Mini IO Expansion Board

Mini IO Expansion Board - Easily mounts on any existing Pro-Sereis or CompactSeries Controller to 1 channel of analog output, 1 PWM channel, 1 analog input and full quadrature encoder input. Used for THC, spindle control, encoder readng, threading or any other analog or PWM controlled process.


OD-080-M
+ Quote
8 amp Microstepping Replacement Drive Board

8 amp Microstepping Replacement Drive Board for the Pro-Series Microstepping CNC Controller


OT-02-5
+ Quote
Tool Length Sensor with 5' Cable

Tool Length Sensor with 5' Cable allows you to automatically sense the length of your tool after each manual or automatic tool change. It eliminates the need to manually "touch off" the tool to find program zero every time you change a tool.


OH-06
+ Quote
XLR Stepper Motor Connector Kit

XLR Stepper Motor Connector Kit for 3 axes, includes ( 3) Male XLR Connectors


OCS-02
+ Quote
Cooling/Sprayng Device with two spray nozzles

Cooling/Sprayng Device the output from each nozzle is regulated by a single knob on the control. Mist spray may be turned on or off instantly to coordinate with the cutting cycle, and the spray mix made lean or rich as needed. Multi nozzle systems have a separate control for each coolant line. The controls are manifolded so that only one air hose is required. Each unit comes fully assembled ready for hook-up to your shop air supply.

OT-01-5
+ Quote
Touch Probe with 5' cable

Touch Probe with 5' cable gives your 3 Axis machine tool the capability to become a 3-D digitizer with the Flashcut CNC digitizing probe. Includes ruby-tip probe, 3/8" mounting shaft, cable and digitizing software to create point cloud (XYZ) or STL files. Capable of easily capturing 2-D or 3-D data, the touch-probe is an easy and effective way to reverse engineer your parts. Other size ruby tips optionally available.


OH-05
+ Quote
Servo Motor Connector Kit

Servo Motor Connector Kit (Power and Signal Connector for single axis) Includes 3 Pin XLR and DB15 Connectors


OC-MV-10-18XX
+ Quote
10' Servo Motor Cable 18 AWG XLR power cable and DB15 feedback cable pair

10' Servo Motor Cable Pair with 18 AWG, shielded and grounded power cable with XLR connectors on both ends paired with shielded and grounded DB15 feedback cable


OS8-25
+ Quote
8 Pair Limit Switch Cable, 25ft

8 Pair Limit Switch Cable, 25ft


OH-04-IO-Mini
+ Quote
I/O Connector Kit for Mini I/O Expansion Board

I/O Connector Kit for Mini I/O Expansion Board includes 18 pin MFJ connector and contacts


OC-MV-75-18XX
+ Quote
75' Servo Motor Cable 18 AWG XLR power cable and DB15 feedback cable pair

75' Servo Motor Cable Pair with 18 AWG, shielded and grounded power cable with XLR connectors on both ends paired with shielded and grounded DB15 feedback cable