|
|
 |
 |
| |
Description
| Apps | Features
| Components | Specs
| Ordering| Options | PC
Reqs
3 Axis Servo Control System
(CP-4A01-1-3080VA1
|
 |
| |
Description
The FlashCut CNC Servo Control System. featuring Flashcut CNC Software and USB Signal Generator, drives any machine
tool with smooth power and precision. Closed loop PID control
provides accurate positioning even under the most strenuous
conditions. FlashCut offers a wide range of servo motors
to suit your needs including NEMA frame sizes 23, 34 and
42. The FlashCut CNC Servo Control System also works with
most existing brush-type or brushless servo motors. Whether
you have a miniature table top mill or lathe, a Bridgeport-type
mill or a full sized router, our servo drive systems have
the right power to suit your needs.
The
FlashCut Servo Control Box comes completely wired with a
power supply in an anodized aluminum chassis. Our motors
come cabled and shielded, ready to plug directly into the
FlashCut Servo Control Box. All servo systems come complete
with the acclaimed FlashCut CNC Windows Software and USB Signal
Generator giving you the ultimate in ease of use, power
and flexibility.
Typical
Applications
- Mills
- Lathes
- Routers
- Laser
and Plasma Cutters
- Waterjets
- Industrial
Automation
- Lab
Automation
-
OEM CNC Controls for any
application
 |
| Our
automatic servo tuning software takes the guesswork
out of tuning your servo motors. |
Important
Features
- Motors
supported
- Brushless
60/120° commutated (AC)
- Brush-commutated
(DC)
- Two
Models
- 12A
peak, 8A continuous output current
- 20A
peak, 12A continuous output current
- 2,
3 and 4 Axis Models available
- Step
/ encoder count multiplier
- 32-bit
position, velocity, acceleration, 16-bit PID filter gain
values
- Comprehensive
short-circuit, over current protection and overheating
protection.
- Overheating
protection
- Servo
rate 2 kHz, PWM frequency 20 kHz
- Encoder
transition rate up to 2MHz
- Automatic
commutation using hall sensors.
- Digital
input is compatible with rotary or linear encoders.
- Easy-to-use
Windows interface lets you easily tune servo parameters
for the motors and system you are driving.
- Auto-Tune
feature automatically tunes and sets the servo parameters
for your particular setup.
Components
Included
- FlashCut
CNC Software
- FlashCut
CNC USB Signal Generator
- Servo
Drive Box(2, 3 or 4 axis) including
- Servo
Drive Modules
- RS-232
interface for tuning
- 62VDC
Power supply
- Rugged
motor power and signal plugs
- User's
Guide and Hardware Guide
- All
required cables
- Free
technical support
- All
motors include10 foot cable ready to plug into servo drive
box
Specifications
| Servo
Drive Box |
| Driver
current per motor coil |
8
amps continuous, 12 amps peak
12 amps continuous, 20 amps peak |
| Input
Voltage |
110
VAC or 220VAC |
| Driver
Voltage |
62
VDC |
| Physical
Size of Driver Box |
W=13.5",
L=12.5", H=6.5" |
| Drive
Technology |
Digital
PID Filter with auto tuning of servo gain values
|
| Motor
Tuning |
Automatic
tuning using Windows software |
| Input
Signal for Motor Control |
Step
and Direction |
| Signal
Generator |
| PC
Interface |
USB or Serial
Port |
| Input
Voltage |
9VDC
using 110 VAC or 220VAC Adapter (included)
|
| Physical
Size |
W=8",
L=6.25", H=2.5" |
| I/O
lines |
8
input, 8 output |
Determining
Your Drive Box Part Number
FlashCut
CNC offers a wide variety of Servo Motor Drivers. Use the
following diagram to determine the part number for the driver
that you need. Although there are many possible combinations,
we have given a few examples below.
| Part
Numbers |
Description
|
Price |
| n
= Number of axis |
|
2-Axis |
3-Axis |
4-Axis |
| CP-501A-n080VA1 |
8
A Continuous 12 A Peak Servo Driver, 110/220 VAC |
$3915 |
$4290 |
$4855 |
| CP-501A-n120VA1 |
12
A Continuous 20 A Peak Servo Driver, 110/220 VAC |
$4290 |
$4760 |
$5605 |
| No
Extra Charge for 220V |
Options,
Upgrades, and Accessories
Please see Machine Accessories
for detailed descriptions.
| Part
Number |
Description |
Price |
| OS-02 |
Limit/Home
Switch Cable Assembly + 5 Switches |
$100 |
| OR-01 |
2
Channel Relay Box 10 Amps per Channel |
$175 |
| OR-05 |
1
Channel Relay Box 15 Amps |
$225 |
| OR-02 |
1
Channel Relay Box With Contact Relay |
$175 |
Computer
Requirements
-
Version 2
- IBM
compatible, Pentium 800MHz or Equivalent
- NT/2000/XP
- 128-256
MB RAM depending on part complexity
- 1
Available USB or Serial Port
-
Version 1
- IBM
compatible, Pentium or equivalent
- Windows
95/98/ME/NT/2000/XP
- 32-128
MB RAM depending on part complexity
- 1
Available USB or Serial Port
|
|
