|
|
 |
 |
| |
 Description
Excalibur Turn features a 2-axis parametric programming
system. Every programming task is completely editable so
there is no need to redo operations.
OD/ID/Facing
- Nested
Levels of OD, ID and Face contouring
- Parallel
and Contour roughing and finishing
- Selectable
cutting directions
Grooving
- Nested
Grooves supported
- Optinal
Wear Pass for better size control on Grooves
- Peck
Grooving with full retraction or chip break retraction
Additional
Features
- Drill,
Tap, and Peck Drill cycles or Canned Cycles
- Single
Point Threading with multiple starts and straight or zig-zag
infeed angles
- Post
Processor supports OD, ID, Facing and Grooving Canned
Cycles with sub-routines
- Tool
Nose Radius or Imaginary Tool Tip programming supported
|
|
