Company: Maverick Coil Tubing Services
FlashCut Equipment: Pro Series 4axis Servo Controller with 3 NEMA 42 servo motors, IO Expansion Board, 8 in Rotary Table with NEMA 34 Servo Motor
Description: Making Drill bits using a Bridgeport with a 4th axis rotary table. The helical flutes at the bottom part of the bit are what I am using the rotary table to cut. This is 4140 high strength alloy steel, the diameter is 4-5/8" and there are 5 flutes requiring 3 passes each to complete the flutes on each bit.