Machine
(Available in Metric or English)
CNC Lathe 4400 Compact Microstep CNC Lathe 4400 Pro Microstep CNC Lathe 4400 Pro Servo
Part Number SC-4400-025-M
Add to Quote
SC-4400-080-M
Add to Quote
SC-4400-120-V
Add to Quote
X, Z Travel  4.25" x 17"
110 x 430 mm
4.25" x 17"
110 x 430 mm
 4.25" x 17"
110 x 430 mm
Swing Over Bed  3.5" (6.0" with optional riser block) 3.5" (6.0" with optional riser block)  3.5" (6.0" with optional riser block)
Swing Over Table  1.88" (4.25" with optional riser block) 1.88" (4.25" with optional riser block)  1.88" (4.25" with optional riser block)
Distance Between Centers  17" 17"  17"
Crosslide Travel  4.25" 4.25"  4.25"
Resolution  0.000125" 0.000125"  0.000125"
Hole Through Spindle 0.405" 0.405"  0.405"
Spindle Nose Thread  3/4" - 16 T.P.I. 3/4" - 16 T.P.I.  3/4" - 16 T.P.I.
Spindle Nose Taper  #1 Morse #1 Morse  #1 Morse
Spindle Speed Range  70-2800 rpm 70-2800 rpm  70-2800 rpm
Spindle Power  1/3 HP
250W
1/3 HP
250W
1/3 HP
250W
Tailstock Spindle Taper  #0 Morse #0 Morse #0 Morse
Depth Overall, including Crosslide Travel  17" 17"  17"
Height Overall  8.5" 8.5"  8.5"
PC Interface  USB USB  USB
I/O Lines
(Standard)
 8 input, 8 output 8 input, 8 output  8 input, 8 output
I/O Lines with Mini I/O Expansion Board Option 8 input, 8 output, 1 analog output (0-10VDC), 1 PWM output, 1 analog input, 1 quadrature encoder input 8 input, 8 output, 1 analog output (0-10VDC), 1 PWM output, 1 analog input, 1 quadrature encoder input 8 input, 8 output, 1 analog output (0-10VDC), 1 PWM output, 1 analog input, 1 quadrature encoder input
I/O Lines
(with I/O Expansion Option)
 32 input, 32 output, 2 analog 32 input, 32 output, 2 analog  32 input, 32 output, 2 analog
Driver Type  Compact Microstepping Controller Compact Microstepping Controller 8-12A Pro-Series Servo Controller
Driver Technology   Bi-Polar Chopper Digital PID w/ Servo Gain Auto Tuning
Driver Current   2.5 amps/axis 8 Continuous, 12 Peak (amps/axis)
Input voltage   110 VAC 220 VAC 110 VAC 220 VAC
Motor Torque (all Axes)   156 oz-in 151 oz-in
Maximum Feedrate   25 in/min 50 in/min
Overall Machine Dims
(L x W x H)
  35" x 10" x 8"
889 x 254 x 203 (mm)
38" x 13" x 8"
965 x 330 x 203 (mm)

 Computer Requirements

  • IBM compatible, Pentium 1GHz with at least Dual Core or equivalent processor
  • Windows XP/Vista/7 /8 (32 or 64 bit)
  • 1-4 GB RAM depending on size of G-Code file
  • 1 available USB Port (2 if you are using our control pendant)
  • Hard drive with at least 60MB of available space
  • A high-performance graphics card is recommended for larger files with complex surfacing, otherwise a standard graphics processor is sufficient.

4400 Tabletop Lathe Specifications

Part Number Description Photo
OI-03

Add to Quote

 

Mini IO Expansion Board for Applications including analog spindle speed control, digital PWM spindle speed control and Torch Height Control.

 

OA-SS-01

Add to Quote

Spindle Speed Isolation Box for spindle speed control of the 2000 Mill, 5400 Mill and 4400 Lathe

OS-06-4S-SH-L

Add to Quote

The Lathe Limit Switch Kit was specifically designed to be seamlessly integrated with the Flashcut CNC 4400 Lathe. Our Limit/Home Switch kits have two purposes. The first is that it prevents each axis from moving beyond the limits of travel and doing any damage to the machine. The second is that it allows your machine to seek a repeatable home position to set Machine Zero.

view full details >>
OS-06-4S-SH-L
OI-02

Add to Quote

500 line Digital encoder kit: Does spindle speed and threading

OI-02
OP-ESTOP-2

Add to Quote

E-Stop and Illuminated Reset Button in a rugged steel case. Can be mounted or hand held.

OP-ESTOP-2
OP-ESTOP-4

Add to Quote

E-Stop, Illuminated Reset, cycle start and feed hold button in a rugged steel case. Can be mounted or hand-held.

OI-01

Add to Quote

The FlashCut CNC USB I/O Expansion Board provides the FlashCut CNC USB Signal Generator and Pro-Series Microstepping and Servo Controllers with an additional 24 inputs and 24 outputs (for a total of 32 inputs and 32 outputs), two 0-10V analog signals for spindle speed control or other devices that use precision analog control and an encoder input for spindle speed monitoring and threading applications.

view full details >>
OI-01
See the 360 Dynamic View
OR-04

Add to Quote

Universal 2 Channel Relay Box - Includes two 110-240 VAC solid state relays, up to 15 amps total for both AC channels and two switched relays for opening and closing AC or DC circuits up to 0.5A each.

OT-01

Add to Quote

Gives your 3 Axis machine tool the capability to become a 3-D digitizer with the Flashcut CNC digitizing probe. Includes ruby-tip probe, 3/8" mounting shaft, cable and digitizing software to create point cloud (XYZ) or STL files. Capable of easily capturing 2-D or 3-D data, the touch-probe is an easy and effective way to reverse engineer your parts. Other size ruby tips optionally available.  Also available with a 25ft cable (OT-01-25)

view full details >>
OH-01
OT-02

Add to Quote

Tool Length Sensor allows you to automatically sense the length of your tool after each manual or automatic tool change.  It eliminates the need to manually "touch off" the tool to find program zero every time you change a tool.  Also available with a 25ft cable (OT-02-25)

Can also be used as a digitizing touch probe when the optional mounting shaft and ruby-tip probe are attached.  (See OT-01 and OT-03)

Typical Applications

view full details >>
OT-02
OT-03

Add to Quote

Touch Probe and Tool Length Sensor - A package deal for getting a touch probe (OT-01) and a tool length sensor (OT-02) using the same precision switch unit. A great savings over buying them separately if you do not need to use them simultaneously.

 

 

OT-03
,
OT-03
OC-MP-10-22MM

Add to Quote

10' Motor Cable for Stepper Motors Driven by 6 amps or less with Molex connectors on both ends

OP-01

Add to Quote

This 38-function pendant allows you to control your machine from wherever you need to be. It is specially programmed to take advantage of commonly used functions in FlashCut such as Jogging, Point Moves, Setting Zero, Controlling Your Program, Homing and Turning on and off your Spindle. It can also be easily programmed from the FlashCut software interface for any special function that you need for your application. It connects to your PC using a 10' USB cable (included).

view full details >>
OP-01