Bridgeport & Large Mill / Lathe Kits

Part Number Description Photo
RH-BP-XYBALL ADD TO QUOTE

X-Y Ball Screw Kit for Bridgeport Mills. Easily replace your old ACME screws with precision ball screws. This kit comes with X and Y ball screws, a pair of zero backlash double ball nuts and a yoke designed specifically for the Bridgeport machines. It is available in the following table sizes:
9"" x (32"", 36"", 42"", and 48"")
12"" x (32"", 36"", 42"", and 48"")

Available for clone and other large knee mills also. Call for details with your machine type and dimensions.

Made to work with FlashCut CNC Pro-Series Servo (R-3V-200-4203) or Microstepping (R-3M-080-4201) control kits and is only available for customers using FlashCut CNC Controls.

RH-BP-ZBALL ADD TO QUOTE
RH-BP ADD TO QUOTE

X, Y, Z Motor Mount and Hardware Kit for Bridgeport Series 1 and other large knee mills such as Vectrax, Southbend, Acra, Jet, Enco, etc. Inludes heavy duty steel motor brackets, impact resistant belt covers, indstrial pulleys, belts and associated hardware, Brackets are made of sturdy steel construction and can be modified for to account for small variations in mounting. Mounting template can be downloaded and printed to match mounting holes to your machine. Designed for use with FlashCut CNC Stepper or Servo Controls.

Description Photo
OC-MP-10-18XX
+ Quote

10' Stepper Motor Cable with 18 AWG shielded, grounded twisted pair for noise immunity with XLR connectors on both ends .

OH-03-080-M-XLR
+ Quote

Additional axis connector kit for 8 amp Pro-Series Microstepping includes drive and internal cabling to add an additional axis with an XLR Connection

OS-10-5S
+ Quote

10' 5 Pair Limit / Home Cable assembly + (5) switches

OC-MP-25-18XX
+ Quote

25' Stepper Motor Cable with 18 AWG shielded, grounded twisted pair for noise immunity with XLR connectors on both ends .

OH-03-200-V
+ Quote

Additional axis connector kit for 20 amp Pro-Series Servo includes drive module and internal cabling to add an additional axis

OS-25
+ Quote

25' 5 Pair Limit switch cable

OC-MP-50-18XX
+ Quote

50' Stepper Motor Cable with 18 AWG shielded, grounded twisted pair for noise immunity with XLR connectors on both ends .

OH-04-IO-Classic
+ Quote

I/O Connector Kit for Classic I/O Expansion Board includes 16 and 10 pin MFJ connector and contacts along with (3) 50 pin headers and contacts, encoder cable and an analog signal cable.

OS-5S
+ Quote

(5) miniature switches

OC-MV-10-18XX
+ Quote

10' Servo Motor Cable Pair with 18 AWG, shielded and grounded power cable with XLR connectors on both ends paired with shielded and grounded DB15 feedback cable

OH-04-IO-Mini
+ Quote

I/O Connector Kit for Mini I/O Expansion Board includes 18 pin MFJ connector and contacts

OS-5S-IND
+ Quote

(5) industrial switches

OC-MV-25-18XX
+ Quote

25' Servo Motor Cable Pair with 18 AWG, shielded and grounded power cable with XLR connectors on both ends paired with shielded and grounded DB15 feedback cable

OH-05
+ Quote

Servo Motor Connector Kit (Power and Signal Connector for single axis) Includes 3 Pin XLR and DB15 Connectors

OS8-10
+ Quote

8 Pair Limit Switch Cable, 10ft

OC-MV-50-18XX
+ Quote

50' Servo Motor Cable Pair with 18 AWG, shielded and grounded power cable with XLR connectors on both ends paired with shielded and grounded DB15 feedback cable

OH-06
+ Quote

XLR Stepper Motor Connector Kit for 3 axes, includes ( 3) Male XLR Connectors

OS8-25
+ Quote

8 Pair Limit Switch Cable, 25ft

OC-MV-75-18XX
+ Quote

75' Servo Motor Cable Pair with 18 AWG, shielded and grounded power cable with XLR connectors on both ends paired with shielded and grounded DB15 feedback cable

OI-01-U
+ Quote

The FlashCut CNC USB I/O Expansion Board provides the FlashCut CNC USB Signal Generator and Pro-Series Microstepping and Servo Controllers with an additional 24 inputs and 24 outputs (for a total of 32 inputs and 32 outputs), two 0-10V analog signals for spindle speed control or other devices that use precision analog control and an encoder input for spindle speed monitoring and threading applications. It easily fits into existing USB Signal Generator using the included hardware.

OT-01-5
+ Quote

Touch Probe with 5' cable gives your 3 Axis machine tool the capability to become a 3-D digitizer with the Flashcut CNC digitizing probe. Includes ruby-tip probe, 3/8" mounting shaft, cable and digitizing software to create point cloud (XYZ) or STL files. Capable of easily capturing 2-D or 3-D data, the touch-probe is an easy and effective way to reverse engineer your parts. Other size ruby tips optionally available.

OCS-02
+ Quote

Cooling/Sprayng Device the output from each nozzle is regulated by a single knob on the control. Mist spray may be turned on or off instantly to coordinate with the cutting cycle, and the spray mix made lean or rich as needed. Multi nozzle systems have a separate control for each coolant line. The controls are manifolded so that only one air hose is required. Each unit comes fully assembled ready for hook-up to your shop air supply.

OI-02
+ Quote

500 Line Encoder Kit - Includes 500 line optical encoder, housing, cable and bracket to attach to a spindle or housing. Necessary for doing threading or reading RPM in the software.

OT-02-5
+ Quote

Tool Length Sensor with 5' Cable allows you to automatically sense the length of your tool after each manual or automatic tool change. It eliminates the need to manually "touch off" the tool to find program zero every time you change a tool.

OD-080-M
+ Quote

8 amp Microstepping Replacement Drive Board for the Pro-Series Microstepping CNC Controller

OI-03-U
+ Quote

Mini IO Expansion Board - Easily mounts on any existing Pro-Sereis or CompactSeries Controller to 1 channel of analog output, 1 PWM channel, 1 analog input and full quadrature encoder input. Used for THC, spindle control, encoder readng, threading or any other analog or PWM controlled process.

OT-03-5
+ Quote

Touch Probe or Tool Length Sensor with 5' Cable - Includes multi-directional switch housing with mechanical parts for a touch probe and a tool length sensor

OD-V-12A-182D-1210
+ Quote

8 Amp Continuous, 12 Amp Peak Replacement Servo Drive Module for the Pro-Series Servo CNC Controller

OP-01
+ Quote

This 38-function pendant allows you to control your machine from wherever you need to be. It is specially programmed to take advantage of commonly used functions in FlashCut such as Jogging, Point Moves, Setting Zero, Controlling Your Program, Homing and Turning on and off your Spindle. It can also be easily programmed from the FlashCut software interface for any special function that you need for your application. It connects to your PC using a 10' USB cable (included). It also includes a clear, flexible cover to keep the chips away from the keys without losing any functionality.

OD-V-20A-182D-2010
+ Quote

12 Amp Continuous, 20 Amp Peak Replacement Servo Drive Module for the Pro-Series Servo CNC Controller

OP-ESTOP-2
+ Quote

E-Stop and Illuminated Reset Button in a rugged steel case. Can be mounted or hand held.

OF-06-P
+ Quote

6" Rotary Table with Motor, 8A Microstepping Stepper Drive and Motor Cable. Perfect for adding fully interpolated or indexd 4th axis motion to the 9100 CNC Mill or any other Benchtop or Miniature CNC machine driven by a Pro-Series Microstepping CNC Controller. Can be mounted verticallly or horizontally.

OP-ESTOP-4
+ Quote

E-Stop, Illuminated Reset, cycle start and feed hold button in a rugged steel case. Can be mounted or hand-held.

OF-06-V
+ Quote

6" Rotary Table with Motor, 8-12A Servo Drive and Motor Cable. Perfect for adding fully interpolated or indexd 4th axis motion to the 9100 CNC Mill or any other Benchtop or Miniature CNC machine driven by a Pro-Series Servo CNC Controller. Can be mounted verticallly or horizontally.

OR-04
+ Quote

Universal Relay Box (2 switched 110-240 VAC channels, up to15 amps total and 2 contact relays 0.5 amps each). Perfect for turning on and off a 1.5HP or less spindle, a Plasma Torch or any other AC powered or small relay controlled device.

OF-08-P
+ Quote

8" Rotary Table with Motor, 8A Microstepping Stepper Drive and Motor Cable. Perfect for adding fully interpolated or indexd 4th axis motion to a Retrofitted Bridgeport CNC Mill or any other Large CNC machine driven by a Pro-Series Microstepping CNC Controller. Can be mounted verticallly or horizontally.

OR-05
+ Quote

Relay Box - 1 Line 20 Amps. Perfect for switching the 110-220VAC power on and off to a 1.0 - 2.5 HP Spindle or any other 20 amp or less AC powered device.

OF-08-V
+ Quote

8" Rotary Table with Motor, 8-12A Servo Drive and Motor Cable. Perfect for adding fully interpolated or indexd 4th axis motion to a Retrofitted Bridgeport CNC Mill or any other Large CNC machine driven by a Pro-Series Servo CNC Controller. Can be mounted verticallly or horizontally.

OS-04
+ Quote

Bridgeport Limit/Home Switch Kit includes mounting brackets, hardware, 10' 5 Pair Limit Switch Cable and (5) Industrial Switches

OB-BX-01
+ Quote

DB25 Breakout Box - DB25 connector broken out to (25) screw terminals to conveniently connect motor signals from DB25 connector of SIgnal Generator to external drive components.

OH-01
+ Quote

I/O Connector Kit for Classic I/O Expansion Board includes 16 and 10 pin connectors and contacts

OS-10
+ Quote

10' 5 Pair Limit Switch Cable

387
Loading Video...
Loading Video...
Loading Video...