Below are just a few examples of some custom solutions powered by FlashCut CNC. To learn more about our custom solution support, contact us today at 
 1-888-883-5274 or direct 1-847-940-9305 and find out how we can take your industrial operations to the next level.

Retrofitting Precix 9100

Retrofitting Precix 9100

Replace original Precix controls with FlashCut CNC

Read More
Production Pipe Winding

Production Pipe Winding

2 axis hydraulic servo control of a 30 foot lathe for fabricating fibreglass pipes used in the oil industry. In this unique application, The FlashCut CNC Pro-Series Servo Controller was used for precision winding of fibreglass thread to create a strong and consistent wall to the production pipe.

Read More
Lawrence Livermore National Lab

Lawrence Livermore National Lab

The National Ignition Facility at Lawrence Livermore National Lab in Livermore, CA USA is on the brink of making scientific history. In February of 2010 they will attempt to create energy from fusion for the first time on earth. Fusion is the process the sun uses to make energy.

Read More
Fadal VMC 4020 Retrofit

Fadal VMC 4020 Retrofit

3 axis vertical machining center with automatic tool changer, the FlashCut CNC Platinum Series Servo Controller was used to replace outdated controls on the Fadal VMC that is used for production in an Industrial environment.

Read More
Versatile & Advanced CNC Retrofit Kits

Custom Lathe for Field Maintenance

The 2 axis Platinum Series is used to control the Locomotive Wheel Lathe from Delta Manufacturing for a precise and portable solution to locomotive and railway wheel truing. The CNC Wheel Lathe eliminates the cost of shipping wheel sets or an entire locomotive to a reconditioning facility. It reduces the downtime associated with wheel maintenance programs and is a fraction of the cost of an under-floor system. The Delta Lathe is fast, precise and safe. The CNC Wheel Lathe provides an accurate profile that can be used in a shop or in the field.

Read More
Bridgeport Retrofit making Helical-Flute Mill Bits from 4140 steel

Bridgeport Retrofit making Helical-Flute Mill Bits from 4140 steel

Making Drill bits using a Bridgeport with a 4th axis rotary table. The helical flutes at the bottom part of the bit are what I am using the rotary table to cut. This is 4140 high strength alloy steel, the diameter is 4-5/8" and there are 5 flutes requiring 3 passes each to complete the flutes on each bit.

Read More