CNC App & Retrofits
Overview
Controls
Accessories
Software
Retrofits
Gallery

CNC Oxy-Fuel Cutting with Smooth and Precise Motion Control

With FlashCut’s CNC controls for oxy fuel, all gas and ignition controls are at your fingertips, from preheating to piercing to XY cutting.
Our software and CNC controls for oxy-fuel have embedded cut charts for all leading brands of oxyfuel torches such as Victor, Miller and Harris, taking the guesswork out of choosing kerfs and feed rates to make perfect cuts.

FlashCut’s Controller Features for CNC Oxy-Fuel Cutting 

  • Precise control of all oxyfuel gas and ignition at your fingertips.
  • Two preheat levels, pierce, water usage, and purge delay.
  • Hold, set, and release the preheat buttons to allow the operator to set and repeat the preheat time.
  • Precision gas control to make sharp and accurate cuts.
  • Creep speed during the lead-in to minimize splattering.
  • Embedded Ability to cut charts for leading brands of oxy fuel torches leading brands, taking the guesswork out of kerfs and feed rates.
  • Real-time jogging to vary height control.
  • Ability to easily add control buttons to the screen.

What is CNC Oxy-Fuel Cutting?

CNC Oxy-Fuel cutting technology provides precise gas control to make sharp and accurate cuts in ferrous material.
It uses a combination of oxygen and fuel to cut mild steel and metals. A chemical (exothermic) reaction between the oxygen and carbon steel creates iron oxide, referred to as slag. The slag is blown out of the gap by the high pressure of the gases used.
The cutting speed, heat flame adjustment, height control, and material thickness are some factors that can influence the final quality, accuracy, finish and angle of the cut edge. Oxy-fuel cutting systems are used to cut ferrous metals and can cut very thick materials up to 24” (600mm) with a cutting angle very close to perpendicular. An oxy-fuel cutting table can easily be configured with multiple cutting heads making it a very high production CNC application.

Advantages of Oxy-Fuel Cutting

  • Highly accurate cutting system.
  • Ability to cut through material thickness up to 24”.
  • Ability to have multiple cutting torches.
  • Close to perpendicular cuts.
  • Low operational costs when compared to other CNC cutting machines.

FlashCut also provides tailored controls for other 2D cutting technologies, including plasma systems, waterjet, laser, and other CNC solutions.

Powerful CNC Controls for Oxy fuel Cutting

FlashCut CNC has many options for adding state of the art controls, motors, and cables to your oxy-fuel cutting table. Our smooth and precise motion control, along with fingertip control of the pre-heat and cutting processes, will allow you to produce parts quickly and accurately. We offer complete micro stepper and closed-loop servo solutions to drive your oxy-fuel cutting machine with precision, power, and ease.

cnc oxy fuel cutting

Build A Quote For Your Oxy-Fuel Table
See Our Controls Options

Part Number
Part Name
Description
Image
+Quote

Digital & Analog I/O Expansion Board for USB Signal Generator

Adds 24 inputs, 24 outputs, analog ins and outs to Signal Generator and Pro Series Control...
+Quote

Mini IO Expansion Board

Easily adds 1 analog, 1 PWM & 2 relay outputs, 1 analog & 1 quadrature encoder or ...
+Quote

Control Pendant with Joystick

24-function and 8-direction joystick pendant with programmable functions such as jogging a...
+Quote

8 Channel Relay Box

8 Channel Relay Board with cable for connection to Signal Generator Board...
+Quote

Universal Relay Box

Convenient metal enclosure with 2 switched 110-240 VAC relays and 2 contact relays...
+Quote

Laser Pointer and Software Support with 25ft cable (A-la-carte feature)

...
+Quote

Laser Pointer and Software Support with 35ft Cable(A-la-carte feature)

Laser pointer w/ 35' cable plus software support. Great for dry runs and plate alignment....
+Quote

Laser Pointer and Software Support with 60ft Cable (A-la-carte feature)

Laser pointer w/ 60' cable plus software support. Great for dry runs and plate alignment....
+Quote

25' 5 Pair Limit switch cable

Plugs directly into input port of FlashCut CNC Controller for easy connection to most inpu...
+Quote

35' 6 Pair Limit switch cable

Plugs directly into input port of FlashCut CNC Controller for easy connection to most inpu...
+Quote

(5) Miniature Switches

Set of 5 miniature switches for general limit or home input lines....
+Quote

Laser Pointer - Software Support (A-la-carte feature)

...
+Quote

Joystick Plus Pendant Board (A-la-carte feature)

8 position joystick for jogging in the XY plane including 45 degree angles....
+Quote

Programmable Pendant Board (A-la-carte feature)

Programmable matrix board that allows you to add up to 144 physical switches to your contr...
+Quote

I/O Connector Kit for Classic I/O Expansion Board

...
+Quote

I/O Connector Kit for Mini I/O Expansion Board

I/O Connector Kit for Mini I/O Expansion Board includes 18 pin MFJ connector and contacts...
+Quote

(5) industrial switches

Set of 5 industrial switches for rugged limit or home input lines. ...

CAD/CAM and CNC Software for Oxy-Fuel

FlashCut CAD/CAM/CNC for Oxy-Fuel features full integration with our controller software. It also includes an intuitive interface and automatic kerf compensation based on integrated cut charts for many common oxy-fuel torches. Enhanced oxyfuel support puts all of the controls at your fingertips, including release and extend of preheat time, creep rate and real-time Z adjustments.

CAD CAM CNC Software Oxy Fuel

Part Number
Part Name
Description
Image
+Quote

FlashCut CAD/CAM/CNC V8 Pro for Plasma and Oxy-Fuel

Completely integrated CAD/CAM/CNC for 2D cutting with plasma or oxyfuel. Go from design to...
+Quote

FlashCut CAD/CAM/CNC V8 Standard for Plasma and Oxyfuel

...
+Quote

Collision Avoidance

CAM feature to re-route rapid moves to avoid possible tip-ups....
+Quote

Laser Pointer - Software Support (A-la-carte feature)

...
+Quote

Dynamic Vent Zones (A-la-carte feature)

...
+Quote

Advanced File Management (A-la-carte feature)

Lets you automatically load and run a g-code from a bar-code or folder location....

FlashCut CNC Oxy-Fuel Cutting Machine Retrofits

Breathe new life into your existing oxy-fuel cutting table with our simple and powerful retrofits. Retrofits can save you time and money with more productivity and less maintenance. If your machine is in good shape, purchasing a retrofit can be more economical than buying a new cutting table. Your machine can be up and running within a day with the newest and best integrated FlashCut CAD/CAM/CNC oxy fuel cutting systems.

No item has been found for this section

Your Quote List
 
USA: (888) 883-5274
INTL: +1 (847) 940-9305